[mythtvnz] followup of new 0.27 install

[Curtis Walker]

On 15 Oct 2013 08:50, "Mark van Dijk" <mark.van.dijk.74 at gmail.com> wrote:
>
> I've put some extra memory in the machine (now 2GB).
>
> most of the video looks perfect (tested TV2) - however every 10-20 mins
or so, the video becomes unwatchable due to MPEG artifacts which last for
1-2 minutes getting worse and worse before suddenly going right again.  I
played the video file on another machine, and the artifacts are still there
- therefore the artifacts are in the recorded stream.
>
> Signal strength on my HVR-2200 tuner card is very good, and booting up to
the old 0.23 Myth install makes the issue dissappear.  Nothing in dmesg or
myth frontend/backend logs.
>
> Found this thread which seems to match what i'm seeing:
>     http://www.gossamer-threads.com/lists/mythtv/mythtvnz/498115
>
> Any ideas?
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

Yes, you need to download and install the firmware for your dvb-t card.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20131015/35b09237/attachment.html>