[mythtvnz] TeVii S421
Tony Sauri
hoiho.nz at gmail.com
Mon Apr 15 05:49:36 BST 2013
On 15/04/13 16:40, Austin wrote:
> Update on my S421 problems: dvbtune now works, and outputs all the station
> info XML stuff. However, 'scan' will not tune. As noted by Stephen Worthington,
> no firmware was loaded during boot, and this is the case even after a cold
> boot. The card state is wrongly detected and reported in dmesg as 'warm'. I
> assume this is why 'scan' gets nowhere. Probably an issue to be fixed by the
> driver maintainers, but if anyone has any ideas...
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
>
Was your boot a cold boot (ie power removed from pc and devices).
There are some devices that report being warm and failing to load
firmware after a reboot that does not involve a power-off.
TOny
More information about the mythtvnz
mailing list