[mythtvnz] Channel id to name tables: Where are they?

[Nick Rout]

On Tue, Oct 23, 2012 at 8:41 PM, Nick Rout <nick.rout at gmail.com> wrote:
> On Tue, Oct 23, 2012 at 5:27 PM, Worik Stanton <worik.stanton at gmail.com> wrote:
>> On 23/10/12 17:00, Nick Rout wrote:
>>>
>>>
>>>> > I have three sources.  One for each of my tuners and a third for an old
>>>> > and now obsolete tuner I used in the past.
>>> I understand both tuners are DVB-T. If so, you only need one source.
>>> (The redundant one doesn't matter if it is not attached to a tuner)
>>
>> What do I do about the input connections?  I had two, one now points to
>> (None)
>>
>> [DVB : /dev/dvb/adaptor0/frontend0 ] (DVBinput) --> (NONE)
>> [DVB : /dev/dvb/adaptor1/frontend0 ] (DVBinput) --> Pinnicle
>>
>> My remaining source is named "Pinnicle"
>
>
> Both tuners should connect to the same source.

Frankly IMHO you should delete all tuners and sources and start again!