[mythtvnz] Pixellation Every ~ 20 minutes

[Paulgir]

>> Could you describe how you do this in terms an idiot can follow?
>> How do you get extract.sh to do it's stuff.
>> I just tried it on my Ubuntu box and nothing seemed to happen.
>>
>> -Paul
>>
> This from the HVR2200 linuxTV wiki page
> (http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200):
>
> Open a terminal on your desktop and enter the following commands one at  
> a time:
>
> wget http://www.steventoth.net/linux/hvr22xx/22xxdrv_27086.zip
> wget  
> http://www.steventoth.net/linux/hvr22xx/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
> wget http://www.steventoth.net/linux/hvr22xx/extract.sh
>
> You should see some stuff downloading after each of the above. Next
> (still in a terminal), run the extractor shell script:
>
> sh extract.sh
>
> You should now have 4 or 5 firmware files (*.fw) on your desktop. Now,
> still in the terminal, copy these extracted files to the correct
> place:
>
> cp *fw /lib/firmware
>
> Some linux distros, might need the following line instead of the above:
>
> cp *fw /lib/firmware/`uname -r`
>
> Hopefully this is simple enough!
>
Thanks for that - I did figure  < sh extract.sh > out myself.
Maybe I'm not such an eejit after all.;P

-Paul