[mythtvnz] tv_grab_nz-py set up

[Curtis Walker]

On 24 January 2012 22:04, Worik Stanton <worik.stanton at gmail.com> wrote:

> On 24/01/12 10:43, Worik Stanton wrote:
> > Bingo!
> Almost.  I live in Dunedin and the powers that be have changed the
> channel frequencies.  So I had to do a rescan.
>
> Now I have data for one day for most channels.  I have no data for TV2
> or TV7.
>
> I have channel numbers for all channels.
>
> TV2 and TV7 do not have logos automatically found but I cannot see why
> that should matter.
>
> All channels have on screen information about what is playing
>
> I have run Curtis' script as the mythtv user.
>
> I am unsure what other information could be useful.
>
> cheers
> Worik
>
>
Not so close, I'm afraid. The one-day data indicates it's pulled
over-the-air data, which does provide you with one day's programme
scheduling and information. If your 'status' shows that mythfilldatabase
ran successfully and there is data for 6 or 7 days (indicating the script
has run properly), but you only have one day's prgramme stuff, there is
still some errant setting causing a mismatch. Not sure what, but will have
a bit of a think on it and get back if I come up with something (or someone
else will).

That said, with the good step-by-step instructions posted for the
tv_grab_nz-py script, you may also want to try that route.

Good hunting!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20120124/f049d565/attachment-0001.htm