[mythtvnz] Video output resolution question

[Nick Rout]

On Fri, Jan 20, 2012 at 2:37 PM, Paulgir <paulgir at gmail.com> wrote:
>
> I've been making progress with my mythbuntu installation/set up.
> I have it tuning all the freeview channels on both tuners and have been
> Playing around with the controls to get familiar with the software.
> I have enabled VDPAU.I have the audio and video goind to the TV via
> the HDMI port on the GT430 card,
> Here's the question: My TV displays the resolution for the inputs as
> you select them.The resolution for the myth signal is always 720P.
> even if the same channel via the TV's digital tuner indicates that it is
> 1080i.
> How do I correct this?
> Have I missed something in the set up?

give us the output of these commands:

xrandr
xwininfo -root

If you run these from a terminal within X then they should run like
that, if you ssh in and run them you will need to prepend each command
with

DISPLAY=:0

ie

DISPLAY=:0 xrandr

>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/