[mythtvnz] Dual Twin Output LNB questions...

[Brendan Dacre]

Nick,

If you are going for Channel 9, GEM and GO from Optus D1, forget it, it's
gone from that satellite.  I tried to find the news item but here is the
OPTUS D1 feeds at lyngsat with Ch9 missing.

http://www.lyngsat.com/optusd1.html

Brendan

On 25 February 2012 13:30, Nick Wallingford <nickw at beekeeping.co.nz> wrote:

> Some time back I replaced my original LNB with a Dual Twin Output KU 10750
> LNB.
>
> The instructions that came with it refer to setting:
> LNB Type - "Standard" if there is an lnb type
> LNB LO (Low or 1) - 10750
> LNB LO (High or 2) - 10750 or blank
> 22mhz - off
> LNB Power - On
>
> When setting up the LNB in MythTV, under the DiSEqC (Switch, LNB and
> Rotoru Configuration), I have selected:
>
> LNB Preset: Custom
> LNB Type: Standard (Voltage)
> ...
> LNB LOF (Low) (MHz): 10750
>
> When using the Standard (Voltage) type, LNB LOF (High) is greyed out - but
> I've changed type to Bandstacked, set the (High) to either blank or 10750,
> then changed type back to (Voltage) and it 'stays' there.
>
> My question is, am I on the right track for setting up this LNB?  I've
> still not been able to tune Channel 9 or other vertical polarised
> transponders with a DVB-S2 card - all the others come in fine...
>
> Any help?
>
> Nick
> Tauranga
>
> ______________________________**_________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/**mailman/listinfo/mythtvnz<http://lists.ourshack.com/mailman/listinfo/mythtvnz>
> Archives http://www.gossamer-threads.**com/lists/mythtv/mythtvnz/<http://www.gossamer-threads.com/lists/mythtv/mythtvnz/>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20120225/0c726531/attachment.html>