[mythtvnz] Tuning in with my HVR2200

[David Kirk]

Hi Paul,

Good call.  I was on the analogue input instead of the DVB input.  I've
changed that and done another scan and it has picked up the channels.


Thanks for your help.

David Kirk



On Sun, Feb 12, 2012 at 2:52 PM, Paul Kendall <pkendall64 at gmail.com> wrote:

> On Sun, Feb 12, 2012 at 2:24 PM, David Kirk <davidrkirk at gmail.com> wrote:
> > Hi Paul,
> >
> > Thanks for the quick reply.
> >
> >> This is when you scan in mythtv-setup and do a manual scan. I have an
> >> HVR-2200
> >> and I used the full scan and set it to Sweeden rather than NZ so it
> >> tried all frequencies.
> >
> >
> > I couldn't find Sweden, but I found one called try-all.  It scanned
> through
> > nearly 1000 channels and still couldn't find any new channels.
> >
>
> Have you selected the DVB-T device or are you doing analog V4L scanning?
> Doing DVB-T it should normally only go through channel 28 to 63 or
> something
> like that!
>
> >> You may have configure your TV for Native mode or game mode 1:1 mode or
> >> something like that.
> >
> >
> > I found game mode, but it didn't change anything.
>
> Are there any other modes listed.
>
> >
> >
> > Thanks
> >
> > David Kirk
> >
> Paul
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20120212/a709de3c/attachment.html>