[mythtvnz] configuring hvr-2200 card

[Roger Searle]

On 16/09/11 07:52, Hadley Rich wrote:
> On Fri, 2011-09-16 at 07:44 +1200, Roger Searle wrote:
>> I'm stuck and not sure where I should go from here, below is as much as
>> I've been able to manage, any advice gratefully accepted.
> You probably want cardid 4 so the following should work;
>
> echo options saa7164 card=4 | sudo tee /etc/modprobe.d/saa7164.conf
> sudo modprobe -r saa7164
> sudo modprobe saa7164
>
> Then check dmesg again.
>
> hads
Some progress - and of course I should have known to do a -r before 
doing another modprobe!

[ 3011.980201] Histogram named irq intervals (ms, count, last_update_jiffy)
[ 3011.980211] Total: 0
[ 3011.980215] Histogram named deferred intervals (ms, count, 
last_update_jiffy)
[ 3011.980221] Total: 0
[ 3011.980224] Histogram named irq to deferred intervals (ms, count, 
last_update_jiffy)
[ 3011.980229] Total: 0
[ 3011.980232] Histogram named encoder/vbi read() intervals (ms, count, 
last_update_jiffy)
[ 3011.980237] Total: 0
[ 3011.980240] Histogram named encoder/vbi poll() intervals (ms, count, 
last_update_jiffy)
[ 3011.980245] Total: 0
[ 3011.980249] Histogram named encoder/vbi read() intervals (ms, count, 
last_update_jiffy)
[ 3011.980254] Total: 0
[ 3011.980257] Histogram named encoder/vbi poll() intervals (ms, count, 
last_update_jiffy)
[ 3011.980262] Total: 0
[ 3011.980280] saa7164 0000:02:00.0: PCI INT A disabled
[ 3021.193961] Linux video capture interface: v2.00
[ 3021.202163] saa7164 driver loaded
[ 3021.202562] saa7164 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> 
IRQ 19
[ 3021.204790] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge 
WinTV-HVR2200 [card=4,insmod option]
[ 3021.204803] saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 19, 
latency: 0, mmio: 0xfcc00000
[ 3021.204818] saa7164 0000:02:00.0: setting latency timer to 64
[ 3021.420087] saa7164_downloadfirmware() no first image
[ 3021.420101] saa7164_downloadfirmware() Waiting for firmware upload 
(NXP7164-2010-03-10.1.fw)
[ 3021.439537] saa7164_downloadfirmware() Upload failed. (file not found?)
[ 3021.439545] Failed to boot firmware, no features registered