[mythtvnz] HVR-2200 Not finding channels...

[Mike Brady]

Quoting rob at webworxshop.com:

> Hi All,
>
> I'm having trouble finding channels with my new HVR-2200. I've followed
> the instructions/experiences of members of this list in earlier threads
> to get the module with the correct firmware. I now have the
> /dev/dvb/adapter[1 & 2] directories populated (adapter 0 is my DVB-S
> card).
>
> In mythtv-setup I've selected 'DVB Capture Card' with device
> /dev/dvb/adapter1/frontend0, which gives me the frontend ID of: NXP
> TDA10048HN DVB-T. I added the other tuner in the same manner. In video
> sources I added a new source and set the listings grabber to be EIT. I
> also set the channel frequency table as newzealand. In input connections
> I've associated adapter1 with my new video source and tried to scan.
>
> In the scan setting window I select the correct input, desired services
> as TV, scan type Full TV and country as New Zealand. Scanning then
> proceeds but each channel times out without finding anything even though
> I'm getting up to 99% signal strenth on some channels.
>
> I'm sure I must be doing something wrong here as the same antenna
> output works with the Freeview tuner in my TV.
>
> Any help appreciated,
>
> Cheers,
>
> Rob
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

The frequencies to use depend on where you are.  I had to use the  
nz-AucklandInfill ones from here  
http://linuxtv.org/hg/dvb-apps/file/887beb83943a/util/scan/dvb-t to  
get mine to work.