[mythtvnz] configuring hvr-2200 card

[Robin Gilks]

> Getting stuff back again.
>
> I had to restore last night's database backup after messing about with
> cards and scanning. The DVB-T section of the HVR-2200 is now working again
> but its using channel data from my USB tuner - scanning resulted in all
> channels being 100% signal level and nothing found :(
>
> I've re-arranged things so I now have
> adapter0 = DVB-S
> adapter1 = DVB-S
> /dev/video0 = STB
> adapter3 = DVB-T
>
> but analog is still blue (but I get sound so its on the correct input).
>
> So weird that it was fine to start with but nowt since. I'll try a reboot
> later in case its a hardware lockup.

One step forward, one back....

The svideo input is working now - in fact it may have been all along as I
found the cable unplugged from the back of the STB - duh!!!

The DVB-T doesn't work again though - really weird as it shows 100% signal
strength, 2.4dB S/N and no_lock. scan from the dvb utils package doesn't
work either (and I've tried priming it with different frequencies in case
the card is fussy). Tried rebooting/power-down but no luck. I know the
aerial is OK as the USB tuner is OK.

Anyone an idea of the name of the digital side of the driver (if its
separate from the saa7164) so I can try unloading/loading so force a
firmware reload?

Cheers

-- 
Robin Gilks