[mythtvnz] Lirc & MCE Remote

[Johan Schuld]

> From: Brett <mythicalbeast at slingshot.co.nz>
> Subject: Re: [mythtvnz] Lirc & MCE Remote
> To: MythTV in NZ <mythtvnz at lists.linuxnut.co.nz>
> Message-ID: <1304056605.2040.3.camel at mythbe01>
> Content-Type: text/plain; charset="UTF-8"
>
> On Thu, 2011-04-28 at 22:41 +1200, Johan Schuld wrote:
> > >Hi Johan
> > >
> > >I'm using MCE remotes on 2 frontends and they work just fine with the
> > >mceusb driver. This is the lsmod output on one of the Zotac boards on
> > a
> > >2.6.32 kernel:
> > >
> > ># lsmod
> >
> > This is my lsmod:
> > dvinepvr:~ # lsmod |grep ir_
> > ir_lirc_codec           4843  0
> > lirc_dev               16018  1 ir_lirc_codec
> > ir_sony_:~ #
> >
> > This is the out-of-the-box suse 11.4 config (apart from me adding
> > mceusb manually). There seems to be a lot of unnecessary modules
>
> Kernel 2.6.36 has lots of lirc changes..kernel drivers are already in
> the kernel & may have different names/more modules ?..
>
> You are on kernel 2.6.xx ? suse 11.4 ?? The other poster was using
> *buntu 10.04 kernel 2.6.32..could be the difference.
>
>

Kernel 2.6.37. suse 11.4 yep. So should be ok with the changes I
assume. Of course something could have been excluded since .36 but bit
unlikely?
I still find it strange I can't start lirc using the "mceusb" driver.