[mythtvnz] DVD doesn't want to play in a bluray player

Mon Mar 7 03:45:09 GMT 2011

Could just be you don't have libdvdread/libcss installed go here:

https://help.ubuntu.com/community/RestrictedFormats

the mediaubuntu repository is probably also worth adding

I am assuming you are using ubuntu

http://medibuntu.org/repository.php

Basically in a nutshell

sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list
http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list &&
sudo apt-get --quiet update && sudo apt-get --yes --quiet
--allow-unauthenticated install medibuntu-keyring && sudo apt-get
--quiet update && sudo apt-get install ubuntu-restricted-extras

On 7 March 2011 16:38, Douglas Pearless <Douglas.Pearless at pearless.co.nz> wrote:
> OK,
>
> Also, it appears that when I put the same disk in my DVD drive, the UDF
> filesystem is being loaded not the iso9660 and hence it too fails?
>
> Anyone got any ideas here what else to test or check?
>
> Cheers
>
> Douglas.
>
> Quoting Joel Wiramu Pauling <joel at aenertia.net>:
>
>> This page is a pretty good introduction.
>>
>> https://help.ubuntu.com/community/RestrictedFormats/BluRayAndHDDVD
>>
>>
>> Each manufacturer has shit and not so shit products - and often will
>> make a no so shit product into a shit product by changing something
>> and not indicating it in the product/packaging.
>>
>> Best advise trot along to a store with a laptop running Ubuntu and
>> with the decss library installed and known to work playing dvd's and
>> plug into to potentially to be purchaced drives and see what happens.
>>
>>
>> -JoelW
>>
>>
>> On 7 March 2011 13:55, Douglas Pearless
>> <Douglas.Pearless at pearless.co.nz> wrote:
>>> Hmm,
>>>
>>> Do you have a recommended drive that I can purchase in NZ?
>>>
>>> Cheers
>>>
>>> Douglas.
>>>
>>> Quoting Joel Wiramu Pauling <joel at aenertia.net>:
>>>
>>>> Many BlueRay drives ( and some DVD's ) espeically from Matsushita, use
>>>> an updated method of region locking which cannot be by-passed using
>>>> the standard dcss2 decrypt methods.
>>>>
>>>> Unless you can find an unlocked firmware on-line you may be out of luck.
>>>>
>>>> I would try with a more recent kernel/distro first on a laptop/VM -
>>>> otherwise be looking to return the product.
>>>>
>>>> -JoelW
>>>>
>>>> On 7 March 2011 13:08, Douglas Pearless
>>>> <Douglas.Pearless at pearless.co.nz> wrote:
>>>>> Since adding a USB bluray player, I can not longer play DVD's in either
>>>>> my
>>>>> IDE DVD player or the USB Bluray player.
>>>>>
>>>>> In both cases it seems to try and load the UDF file system and then
>>>>> fails
>>>>> to
>>>>> read the disk, e.g.
>>>>>
>>>>> [447025.646044] UDF-fs: Partition marked readonly; forcing readonly
>>>>> mount
>>>>>
>>>>> [447025.671882] UDF-fs INFO UDF: Mounting volume
>>>>> 'GEORGE_OF_THE_JUNGLE',
>>>>> timestamp 2003/10/31 00:44 (130c)
>>>>>
>>>>> [447164.016037] usb 2-1: new high speed USB device using ehci_hcd and
>>>>> address 2
>>>>>
>>>>> [447164.221358] Initializing USB Mass Storage driver...
>>>>>
>>>>> [447164.222104] usb-storage 2-1:1.0: Quirks match for vid 05e3 pid
>>>>> 0701:
>>>>> 520
>>>>>
>>>>> [447164.222145] scsi2 : usb-storage 2-1:1.0
>>>>>
>>>>> [447164.222384] usbcore: registered new interface driver usb-storage
>>>>>
>>>>> [447164.222387] USB Mass Storage support registered.
>>>>>
>>>>> [447165.232211] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.01 PQ: 0
>>>>> ANSI:
>>>>>
>>>>>
>>>>> [447165.271823] sr2: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw
>>>>> xa/form2
>>>>> cdda tray
>>>>>
>>>>> [447165.272031] sr 2:0:0:0: Attached scsi CD-ROM sr2
>>>>>
>>>>> [447165.272147] sr 2:0:0:0: Attached scsi generic sg3 type 5
>>>>>
>>>>> [447170.881226] VFS: busy inodes on changed media or resized disk sr0
>>>>>
>>>>> [447172.950082] VFS: busy inodes on changed media or resized disk sr0
>>>>>
>>>>> [447198.953904] sr 2:0:0:0: [sr2] Result: hostbyte=DID_OK
>>>>> driverbyte=DRIVER_SENSE
>>>>>
>>>>> [447198.953913] sr 2:0:0:0: [sr2] Sense Key : Illegal Request [current]
>>>>>
>>>>> [447198.953919] Info fld=0x200
>>>>>
>>>>> [447198.953921] sr 2:0:0:0: [sr2] Add. Sense: Read of scrambled sector
>>>>> without authentication
>>>>>
>>>>> [447198.953929] sr 2:0:0:0: [sr2] CDB: Read(10): 28 00 00 00 02 00 00
>>>>> 00
>>>>> 02
>>>>> 00
>>>>>
>>>>> [447198.953940] end_request: I/O error, dev sr2, sector 2048
>>>>>
>>>>> [447198.953947] Buffer I/O error on device sr2, logical block 512
>>>>>
>>>>> [447198.953951] Buffer I/O error on device sr2, logical block 513
>>>>>
>>>>> [447198.955901] sr 2:0:0:0: [sr2] Result: hostbyte=DID_OK
>>>>> driverbyte=DRIVER_SENSE
>>>>>
>>>>> [447198.955908] sr 2:0:0:0: [sr2] Sense Key : Illegal Request [current]
>>>>>
>>>>> [447198.955913] Info fld=0x200
>>>>>
>>>>> [447198.955915] sr 2:0:0:0: [sr2] Add. Sense: Read of scrambled sector
>>>>> without authentication
>>>>>
>>>>> [447198.955922] sr 2:0:0:0: [sr2] CDB: Read(10): 28 00 00 00 02 00 00
>>>>> 00
>>>>> 02
>>>>> 00
>>>>>
>>>>> [447198.955932] end_request: I/O error, dev sr2, sector 2048
>>>>>
>>>>> [447198.955937] Buffer I/O error on device sr2, logical block 512
>>>>>
>>>>> [447198.955942] Buffer I/O error on device sr2, logical block 513
>>>>>
>>>>> [447199.221405] sr 2:0:0:0: [sr2] Result: hostbyte=DID_OK
>>>>> driverbyte=DRIVER_SENSE
>>>>>
>>>>> [447199.221414] sr 2:0:0:0: [sr2] Sense Key : Illegal Request [current]
>>>>>
>>>>> [447199.221420] Info fld=0x400
>>>>>
>>>>> [447199.221422] sr 2:0:0:0: [sr2] Add. Sense: Read of scrambled sector
>>>>> without authentication
>>>>>
>>>>> [447199.221430] sr 2:0:0:0: [sr2] CDB: Read(10): 28 00 00 00 04 00 00
>>>>> 00
>>>>> 02
>>>>> 00
>>>>>
>>>>> [447199.221441] end_request: I/O error, dev sr2, sector 4096
>>>>>
>>>>> [447199.221448] Buffer I/O error on device sr2, logical block 1024
>>>>>
>>>>> [447199.221452] Buffer I/O error on device sr2, logical block 1025
>>>>>
>>>>> [447199.223283] sr 2:0:0:0: [sr2] Result: hostbyte=DID_OK
>>>>> driverbyte=DRIVER_SENSE
>>>>>
>>>>> [447199.223289] sr 2:0:0:0: [sr2] Sense Key : Illegal Request [current]
>>>>>
>>>>> [447199.223294] Info fld=0x400
>>>>>
>>>>> [447199.223296] sr 2:0:0:0: [sr2] Add. Sense: Read of scrambled sector
>>>>> without authentication
>>>>>
>>>>> [447199.223303] sr 2:0:0:0: [sr2] CDB: Read(10): 28 00 00 00 04 00 00
>>>>> 00
>>>>> 02
>>>>> 00
>>>>>
>>>>> [447199.223313] end_request: I/O error, dev sr2, sector 4096
>>>>>
>>>>> [447199.223319] Buffer I/O error on device sr2, logical block 1024
>>>>>
>>>>> [447199.223323] Buffer I/O error on device sr2, logical block 1025
>>>>>
>>>>>
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Cheers
>>>>>
>>>>> Douglas
>>>>>
>>>>> _______________________________________________
>>>>> mythtvnz mailing list
>>>>> mythtvnz at lists.linuxnut.co.nz
>>>>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>>>>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz at lists.linuxnut.co.nz
>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
>