[mythtvnz] HDMI handshake

[Tim Gibson]

Lets do that again...

Hi Pshem

I to am using Gentoo but ~x86, what portage overlay are you using?

I'd agree make sure you're using same compile flags and recompile all of
mythtv even qt and ffmpeg.  Start mythfrontend with more a verbose log and
see if theres any more info in there...

Regards
Tim Gibson
Mobile: 028 2580 1104 Twitter: NZtimbo
On 4 Jun 2011 20:56, "criggie" <criggie at criggie.org.nz> wrote:
> On 04/06/11 20:21, Pshem Kowalczyk wrote:
>> On 4 June 2011 19:50, criggie<criggie at criggie.org.nz> wrote:
>>> So, what causes the frontend to crash?
>>
>> I can see the frontend process getting fatter and fatter (memory-wise)
>> and somewhere around 2G it just crashes. Most often while watching a
>> recording or a local file. Whatever memory leak it has - ultimately it
>> kills it.
>> I'm running gentoo with mythtv 0.24. I have tried various git versions
>> over the last few months, but ultimately it either gets very slow to
>> respond or just simply crashes.
>
> So your two-pronged approach should be
>
> 1) stop the frontend from crashing
> Try doing that gentoo thing where you recompile with different flags
> till it works...
>
> 2) allow the HDMI to work again after a crash.
> Have you tried making the frontend crash while its attached to a
> different HDMI capable device? Even to take your mythbox to someone
> else's place for a diagnosis.
>
> Good luck!
>
> --
> Criggie
>
> http://criggie.org.nz/
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20110604/cd1376f9/attachment.htm