[mythtvnz] Anyone have DVB-T working on an HVR3000

[Neil Henwood]

i've got a similar setup with a HVR-3000 and a Nova-T-500. Works great 
except the DVB-S wont tune Vertical on the LNB. Im running it on a 
Fedora 11 box with a 2.6.30.10-105.2.23 kernel.

If Myth detects the card, just double check that myth will release the 
tuner when finished so it can do a EIT scan on the DVB-S side. That got 
me for a while. Also can try running backend in a console rather than a 
service to see what errors are spitting out if any.

Neil

Mark wrote:
> I've recently re-added one to my system and it appears to be working ok
> in Ubuntu 10.04. In Ubuntu versions prior to 10.04 getting it to work
> consistently was a real pain and I gave up and bought the Nova-td-500.
>
> I've also got a Nova-TD-500 which I configured as dvb0 and 1 using the
> following in /etc/modprobe.d/options-dvb.conf (so that dvb numbers for
> the HVR3000 and Nova-TD don't change during reboots)
>
> #Options to fix the order of the /dev/dvb cards
> #Set adapter numbers for Nova-TD 500 DVB-T card (dual tuners), and
> AverMedia AverTV DVB-T Volar USB tuner (they use the same driver)
> options dvb_usb_dib0700 adapter_nr=0,1
>
> Mark
>
> On Wed, 2010-05-12 at 22:56 +1200, Graeme Woollett wrote:
>   
>> I've spent an unsuccessful evening trying to get one I have going.  I 
>> have frontend1 selected (DVB-T)
>> I have an HVR2200 and that works fine.  When scanning for channels I do 
>> the full TV scan with NZ selected.  But get no lock and no channels 
>> found. >:o
>>