[mythtvnz] Easiest way to change Prime to use Freeview EPG data

[Hadley Rich]

On Tue, 2010-03-23 at 20:10 +1300, Aaron Whitehouse wrote:
> and edited ~/.xmltv/tv_grab_nz-py.conf:
> from "channel!prime.freeviewnz.tv" to "channel=prime.freeviewnz.tv"
> and from "channel=prime.sky.co.nz" to "channel!prime.sky.co.nz".

Are you sure that's the correct configuration file. I would expect it to
be ~/.mythtv/SOURCENAME.xmltv

> (192.168.0.102 is the system's IP address.) It all appeared to work,
> but gave no message.

No message means things worked, usually :)

> Should I have omitted the "-h 192.168.0.102" because I was running it
> on the backend?

Na, it shouldn't matter either way.

Cheers,

hads

-- 
http://nicegear.co.nz
New Zealand's Open Source Hardware Supplier