[mythtvnz] Optus D1 and Australian TV

[Steven Ellis]

On 11/06/2010, at 4:42 PM, Jim Tittsler wrote:

> On 2010-06-11 16:36, Ross Williamson wrote:
>> If you have nothing but the single card on the dish there shouldn't be any 
>> problem with what you are describing. MythTV is quite aware of the 
>> different polarisations and saves this with the channel info. It will
>> switch whenever it changes to that channel.
> 
> There is just the single Hauppauge Nova-S card... but I apparently
> don't have it configured to be smart enough to automatically change
> polarisations.  I'll investigate those settings since you are
> describing exactly how I had hoped it would work.
> 

I've got mine setup to record both Freeview and SBS off the same dish/card/LNB

I take it you have nothing else using your dish? If this is the case then you just need to make sure you have the correct frequency and polarity defined for the channels.


Steven Ellis - Technical Director
OpenMedia Limited
email   - steven at openmedia.co.nz
website - http://www.openmedia.co.nz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20100611/f590434b/attachment.htm