[mythtvnz] Remotes available locally?
Tony Sauri
hoiho.nz at gmail.com
Tue Jan 19 03:03:07 GMT 2010
On Tue, 19 Jan 2010 15:22, you wrote:
>
> can you tell me the usb id of the receiver (lsusb will tell you).
>
Bus 002 Device 003: ID 1784:0001 TopSeed Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x1784 TopSeed Technology Corp.
idProduct 0x0001
bcdDevice 0.00
iManufacturer 1 Topseed
iProduct 2 eHome Infrared Transceiver
iSerial 3 TS0017OM
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Device Status: 0x0001
Self Powered
Sorry it is not backlit
It is also an IR blaster if you want. I have not used the blaster function.
Tony
More information about the mythtvnz
mailing list