[mythtvnz] mythfrontend closes unexpectedly

[criggie at criggie.dyndns.org]

  That's a dmesg log not a mythfrontend log.   Check out whats in the 
myth log file.

The line about RPC  is to do with NFS mounting - if you don't use NFS 
then no big deal.
Two errors at 31/32 seconds are to do with an ATI Radeon video card.
Google suggests it might be a bug in xserver-xorg-driver-ati
https://bugs.launchpad.net/ubuntu/lucid/+source/linux/+bug/507148

noel at igrin.co.nz wrote, On 08/30/2010 03:48 PM:
> Hi All
> on our frontend machine, mythtv closes unexpectedly with this log snip..
>
> [   18.465627] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   18.544478] Console: switching to colour frame buffer device 240x67
> [   18.903895] lirc_dev: IR Remote Control driver registered, major 61
> [   18.922957] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
> [   18.922962] lirc_mceusb: Daniel Melander<lirc at rajidae.se>, Martin Blatter<martin_a_blatter@
> [   18.923004] usbcore: registered new interface driver lirc_mceusb
> [   19.848047] lirc_serial: auto-detected active low receiver
> [   19.848053] lirc_dev: lirc_register_driver: sample_rate: 0
> [   19.848140] lirc_serial $Revision: 5.104 $ registered
> [   19.890077] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [   19.890082] tg3: eth0: Flow control is off for TX and off for RX.
> [   19.890331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [   21.238583] svc: failed to register lockdv1 RPC service (errno 97).
> [   21.245030] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [   21.257387] NFSD: starting 90-second grace period
> [   30.636025] eth0: no IPv6 routers present
> [   31.222536] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [   32.092067] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [   84.580038] Clocksource tsc unstable (delta = -87096854 ns)
> [  158.444048] usb 1-7: new high speed USB device using ehci_hcd and address 3
> [  158.580332] usb 1-7: configuration #1 chosen from 1 choice
> [  158.634361] Initializing USB Mass Storage driver...
>
> At 21s mark there is the error.. but I don't know what it is!!
> I have recently changed the back end machine, but the system worked for a
> week since this.  Then a few days ago the power-off via remote stopped
> working,&  now the frontend menu closes as soon as it opens.