[mythtvnz] Mythtvbackend segfaults when using a HDHomerun and DVB-C

[Mark de Reeper]

On Sat, Nov 7, 2009 at 6:28 PM, Douglas Pearless <
Douglas.Pearless at pearless.co.nz> wrote:

>  I managed to get things working.
>
> It seems that because I have manually added the only channel I was trying
> and got the frequency wrong, this caused the problem (though it should not
> have seg faulted).
> I deleted the channel, and changed to frequency range to Finland and
> re-scanned and it found all the New Zealand channels.
> Then I was able to manually insert only the Choose channel (the only
> un-encrypted one) and viola! it works.
>
> Cheers
> Douglas.
>
>
> Mark de Reeper wrote:
>
>
> On Fri, Nov 6, 2009 at 9:42 AM, Douglas Pearless <
> Douglas.Pearless at pearless.co.nz> wrote:
>
>> Hi,
>>
>> I have decided to try my HDHomeRun on DVB-C (telstraclear).
>>
>> I have configure it and I can watch channel 68 "Choose" by manually tuning
>> it using HDHomerun config program and piping the stream to VLC as it is
>> unencrypted.
>>
>> I added it to mythtv and note that I have the very latest build from the
>> avenard repo (0.22) and mythbackend segfaults.
>>
>> running the backend with -v all to capture the debug messages I get:
>>
>>  2009-11-06 11:14:46.034 HDHRSH(172.22.0.124-0): Successfully connected to
>> device
>> 2009-11-06 11:14:46.034 HDHRSH: Creating new stream handler 172.22.0.124-0
>> for 172.22.0.124-0
>> 2009-11-06 11:14:46.035 MSqlQuery::exec() "SELECT cardinputid,
>> inputname,   startchan,        tunechan,    externalcommand,        sourceid
>> FROM cardinput WHERE cardid = '7'"
>> 2009-11-06 11:14:46.035 MSqlQuery::exec() "SELECT channum, callsign,
>> channel.chanid,        atsc_major_chan, atsc_minor_chan,        name, icon,
>> mplexid, visible FROM channel WHERE sourceid='4' "
>> 2009-11-06 11:14:46.035 ChannelBase(7): Input #7: 'MPEG2TS' schan(68)
>> sourceid(4) ccid(7)
>> 2009-11-06 11:14:46.035 ChannelBase(7): Current Input #7: 'MPEG2TS'
>> 2009-11-06 11:14:46.036 MSqlQuery::exec() "SELECT inputgroupid FROM
>> inputgroup WHERE cardinputid = '7' ORDER BY inputgroupid, cardinputid,
>> inputgroupname"
>> 2009-11-06 11:14:46.036 HDHRChan(172.22.0.124-0): SetChannelByString(68)
>> 2009-11-06 11:14:46.036 HDHRChan(172.22.0.124-0): Opening HDHR channel
>> 2009-11-06 11:14:46.036 MSqlQuery::exec() "SELECT channel.chanid FROM
>> channel, capturecard, cardinput WHERE channel.channum      = '68'
>> AND       channel.sourceid     = cardinput.sourceid AND
>> cardinput.inputname  = 'MPEG2TS'             AND       cardinput.cardid
>> = capturecard.cardid AND       capturecard.cardid   = '7'
>> AND       capturecard.hostname = 'mythtv'"
>> 2009-11-06 11:14:46.037 MSqlQuery::exec() "SELECT inputgroupid FROM
>> inputgroup WHERE cardinputid = '7' ORDER BY inputgroupid, cardinputid,
>> inputgroupname"
>> 2009-11-06 11:14:46.038 MSqlQuery::exec() "SELECT finetune, freqid,
>> tvformat, freqtable,        commmethod, mplexid,        atsc_major_chan,
>> atsc_minor_chan, serviceid FROM channel, videosource WHERE
>> videosource.sourceid = channel.sourceid AND       channum              =
>> '68'         AND       channel.sourceid     = '4'"
>> 2009-11-06 11:14:46.038 HDHRChan(172.22.0.124-0): Tuning to :114643968
>> 2009-11-06 11:14:46.038 HDHRSH(172.22.0.124-0): Tuning channel :114643968
>> (was none)
>> Segmentation fault
>>
>> I note that channel 68 is 610000000 Hz, and program 401.
>>
>> Has anyone got this working or am I on the bleeding edge?
>>
> I had a similar experience a couple of weekends ago (HDHomerun doing DVB-T)
> and ended up having to go back to a rev of .22 that was working for me. Of
> course I had removed the packages and updated to the latest from the repo
> only to find this issue. It had been long enough the rev I was using was no
> longer around so I was forced to download the specific rev (21866) of the
> src and compile it myself.
>
> Looks like it is happening in the same spot, here a snip of my log:
>
> 2009-10-25 16:56:26.807 MSqlQuery::exec() "SELECT channel.chanid FROM
> channel, capturecard, cardinput WHERE channel.channum      = '10'
> AND       channel.sourceid     = cardinput.sourceid AND
> cardinput.inputname  = 'MPEG2TS'             AND       cardinput.cardid
> = capturecard.cardid AND       capturecard.cardid   = '7'
> AND       capturecard.hostname = 'mythtv'"
> 2009-10-25 16:56:26.819 MSqlQuery::exec() "SELECT inputgroupid FROM
> inputgroup WHERE cardinputid = '3' ORDER BY inputgroupid, cardinputid,
> inputgroupname"
> 2009-10-25 16:56:26.832 MSqlQuery::exec() "SELECT finetune, freqid,
> tvformat, freqtable,        commmethod, mplexid,        atsc_major_chan,
> atsc_minor_chan, serviceid FROM channel, videosource WHERE
> videosource.sourceid = channel.sourceid AND       channum              =
> '10'         AND       channel.sourceid     = '1'"
> 2009-10-25 16:56:26.844 MSqlQuery::exec() "SELECT transportid, networkid,
> frequency, modulation, sistandard FROM dtv_multiplex WHERE mplexid = '6'"
> 2009-10-25 16:56:26.855 HDHRChan(12104329-1): Tuning to :778000000
> 2009-10-25 16:56:26.867 HDHRSH(12104329-1): Tuning channel :778000000 (was
> none)
>
> Not had a chance to revisit this problem yet (in AU on work at the mo) so
> don't have a lot of advice for you except to say to are not alone :-)
>
> Mark
>
>  Took a look at this again over the weekend because it is still a problem
for me. In case anyone else is still facing this issue, you might want to
track http://cvs.mythtv.org/trac/ticket/7624 which has some more details on
the problem.

Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20091123/ac423495/attachment.htm