[mythtvnz] Trouble with Technotrend S-1401 DVB-S
Stuart Whelan
mythtv at somepointinthefuture.co.nz
Fri Jul 31 00:06:22 BST 2009
2009/7/30 Stuart Whelan <mythtv at somepointinthefuture.co.nz>:
> > Hi folks,
> >
> > Having proved the viability of mythtv it was time to replace my borrowed
> > SkyStar-2 with my own DVB-S card.
> >
> > I purchased a Technotrend S-1401 from the good people at nicegear.co.nz
> >
> > It arrived, and I promptly removed the working Skystar 2 and put the
> S-1401
> > in its place, same cabling LNB etc.
> >
> > The Technotrend is being detected:
>
On Thu, Jul 30, 2009 at 7:53 PM, Warren Stuart <warren at chchmow.co.nz> wrote:
> I don't have the knowledge to help, but I have the same card that is
> working fine. Here is my output from dmsg. I got signal with the same
> dvbtune command. I noticed that the v4l2 driver was being loaded
> during card initialisation on my computer but not yours, but doubt
> this is the problem.
>
Thanks for the reply, it was good just to see all the info for another card
and compare it.
For the others on the list:
Is it likely my problem is actually my LNB? That it worked just enough with
my SkyStar2, but not my Technotrend?
Is there any way I could test this without buying another LNB?
If I buy another LNB, should I go for a 'strong dual 10.75 like at
http://lincrad.co.nz/productorder.php?product_id=406
Any advice would be most apprecated.
Cheers,
Stuart.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20090731/b13d1490/attachment.htm
More information about the mythtvnz
mailing list