[mythtvnz] Fwd: Re: VDPAU Results

[James Booth]

I'm actually using an MCE remote, all good now that I have changed the 
settings to use /dev/lirc2. Cheers.

On Monday 27 April 2009 17:03:21 Jean-Yves Avenard wrote:
> Hi
>
> 2009/4/27 James Booth <james at booths.net.nz>:
> > Just a further note, my remote stopped working after the patch was
> > applied. When I checked in /dev I found I now had not only lirc0, but
> > lirc1 and lirc2 as well. hardware.conf specified lirc0, remote was
> > actually lirc2. Should there be multiple lirc entries in /dev?
>
> Yes, there is.
>
> What you're seeing is the sensor of the LCD...
>
> if you're using an happauge it will be on another one.
> probably just need to change the settings so it uses the right /dev/lirc
>
> the lirc for the imon sensor create two devices.
> the remote that comes with it are using two differents device.
> the direction keys use one, the number keys another.
>
> Check on my mythtv patches blog ; I've put it all there if you want to
> use the imon remote.
>
> But with an happauge, it's probably much easier to set up
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20090427/eecd90fd/attachment.htm