[mythtvnz] question regarding Haupauge PVR-500 radio

[Jason Haar]

Hi there

Slightly OT, but I have a 100% working PVR-500 w.r.t MythTV (i.e TV is
great) - but just can't seem to get the radio to work. "ivtv-detect"
picks it up just fine, and "ivtv-radio -s" appears to be picking up all
the local FM frequencies, but when I try to play one via "ivtv-radio -f
XX.X" I get nothing. If I change the play command to "aplay -f cdr < %s"
I can hear static - but I just can't seem to get it to work properly.
Actually, I've managed to get audio on a couple of frequencies - but
it's staticy TV audio - not radio. ivtv-radio says it's playing
/dev/video24 - instead of /dev/radio - but I get a 'resource busy' error
if I try to play that. Anyone got any ideas what's amiss?

This is under CentOS5, ivtv-0.10.6-132.el5. I've even tried it under
2.6.26.3 with no change.

Thanks

Jason


PS: The radio component is detected as:


ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 1-0050: Hauppauge model 23559, rev E691, serial# 10210559
tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x
74)
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type
 62)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0060: TEA5767 detected.
tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)