[mythtvnz] Setup of Cards

[Craig Whitmore]

Hi there.

HVR-4000 (multifrontend patch)
Nova-S+ (works fine)
HVR-2200 (will be working in linux the future when its finished being
written)
Mythtv 0.21

I have at the moment
1  HVR4000 ( adapter0/frontend0) - DVB-S (on 8 port Disq Switch)
2         ( adapter0/frontend1) - DVB-T
3       ( /dev/video0) - Analog TV 
4       ( /dev/video0) - Composite
5 Nova-S+ ( adapter1/frontend0) - DVB-S (on Optus D1 Sat)
6         (/dev/video1) - Analog TV
7         (/dev/video1) - Composite
8 HVR-2200 (adapter2/frontend0) - DVB-T (Not Just Yet Working)
9          (adapter2/frontend1) - DVB-T
10          (/dev/video2)        - Analog TV
11          (/dev/video3)        - Analog TV



How can I group the inputs together in groups and give them priority? If
Card 1+2+3 are in a group. will it try card 1 first and if in use will
go to card 2 etc and it used will goto 3)

1+2 cannot be used at the same time
3+4 cannot be used at the same time
DVB-T Mux1 = Card8
DVB-T Mux2 = Card9
DVB-T Mux3 = Card2
Use Input 8 before Input 2 for recording/viewing so input is free to
change to other Satellites
All DVB-T have 3 virtual tuners( record 3 things off a mux at a time)
all DVB-S have up to 3 virtual tuners (if on same MUX) (mythtv does this
automaticlly by looking at what mux you are on at the same time)
Use inputs 8+9 Before input 3


Thanks