[mythtvnz] Skystar 2 on Ubuntu : scan finds no channels?

[Steven Ellis]

On Sun, January 20, 2008 8:03 pm, stuart at somepointinthefuture.co.nz wrote:
>> scan -v -l 11300 D1.freeview
>
> Still no luck:
>
> stuartw at ubuntu2:~$ scan -v -l 11300 D1.freeview
> scanning D1.freeview
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 12483000 H 22500000 3
> initial transponder 12456000 H 22500000 3
>>>> tune to: 12483:h:0:22500
> DiSEqC: switch pos 0, 18V, loband (index 1)
>>>> tuning status == 0x1f
> WARNING: filter timeout pid 0x0011
> WARNING: filter timeout pid 0x0000
> WARNING: filter timeout pid 0x0010
>>>> tune to: 12456:h:0:22500
> DiSEqC: switch pos 0, 18V, loband (index 1)
>>>> tuning status == 0x1f
> WARNING: filter timeout pid 0x0011
> WARNING: filter timeout pid 0x0000
> WARNING: filter timeout pid 0x0010
> dumping lists (0 services)
> Done.
> stuartw at ubuntu2:~$ cat D1.freeview
> S 12483000 H 22500000 3/4
> S 12456000 H 22500000 3/4
>


Ok so you are getting a partial lock

try this


scan -5 -l 11300 D1.freeview


Steve


--------------------------------------------
Steven Ellis - Technical Director
OpenMedia Limited - The Home of myPVR
email   - steven at openmedia.co.nz
sales   - sales at openmedia.co.nz
support - support at openmedia.co.nz
website - http://www.openmedia.co.nz