[mythtvnz] Skystar 2 on Ubuntu : scan finds no channels?

[Stuart Whelan]

Hi Steve, thanks for the reply.

I don't get anything from: 

stuartw at ubuntu2:~$ dvbtune -p v -f 1248300 -s 22500 -m
Using DVB card "ST STV0299 DVB-S"
tuning DVB-S to L-Band:0, Pol:V Srate=22500000, 22kHz=off
ERROR setting tone
: Invalid argument
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER
polling....
polling....
polling....
polling....

However, replacing the -p v with a -p h gives:

stuartw at ubuntu2:~$ dvbtune -p h -f 1248300 -s 22500 -m
Using DVB card "ST STV0299 DVB-S"
tuning DVB-S to L-Band:0, Pol:H Srate=22500000, 22kHz=off
ERROR setting tone
: Invalid argument
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Bit error rate: 39739
Signal strength: 52536
SNR: 55710
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Signal=52478, Verror=0, SNR=55710dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=52362, Verror=0, SNR=55587dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=52075, Verror=0, SNR=55479dB, BlockErrors=0, (S|L|C|V|SY|)

Kind Regards,
Stuart.