[mythtvnz] Haupauge Nova-T 500 setup

[Steve V]

Hi Vance,

I am using the same card and have got it tuning..

In your mythtv backend setup:

under capture cards use the v3.x setting.

you also have to set up a video source. At first I chose EIT and I got 8 days og programme data but now I only get now and next. (something to sort out).

You can then got to input connections where you can scan for channels.

What sort of hardware are you using?

I have a Pentium (single core) 2.8Mhz with 2gb of RAM but I can not play any HD content as my COU usgae maxes out.

Cheers

Steve
   
Vance McIndoe wrote:
> Support for this card looks complete from what I can read, but I'm
> struggling to get it working. (I'm using 2.6.27-9-generic)
>
> I've tried setting the capture card type as MPEG-2 (PVR-x50, PVR-500),
> but it didn't look so good.  Setting it as "DVB DTV capture card (v3.x)"
> seems better in that I can pick the tuner device (0 or 1), but still no
> video/tuning options.  What am I missing here?
>
> Boot messages:
>
> [   10.876425] dib0700: loaded with support for 7 different device-types
> [   10.877063] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
> warm state.
> [   10.877114] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [   10.877241] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
> DVB-T)
> [   10.897500] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [   10.930381] hda_codec: Unknown model for ALC882, trying auto-probe
> from BIOS...
> [   10.991715] DVB: registering frontend 0 (DiBcom 3000MC/P)...
> [   11.024481] MT2060: successfully identified (IF1 = 1239)
> [   11.511803] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [   11.511985] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
> DVB-T)
> [   11.518053] DVB: registering frontend 1 (DiBcom 3000MC/P)...
> [   11.524425] MT2060: successfully identified (IF1 = 1235)
> [   12.081915] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:14.4/0000:03:06.2/usb8/8-1/input/input6
> [   12.117068] dvb-usb: schedule remote query interval to 150 msecs.
> [   12.117072] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully
> initialized and connected.
> [   12.117314] usbcore: registered new interface driver dvb_usb_dib0700
>
>
> Vance
>
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>  


_______________________________________________
mythtvnz mailing list
mythtvnz at lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/mythtvnz



      Get the world's best email - http://nz.mail.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20081228/cc74efc9/attachment.htm