[mythtvnz] Multiple recordings from the same multiplex

[Steven Ellis]

On Tue, September 11, 2007 9:52 am, Craig Whitmore wrote:
>> I also got VLC set up as a streaming server - splitting all channels o=
n
>> both multiplexes and pushing UDP streams to the backend. It worked wel=
l
>
>
> How are you converting the channels? No transcoding straight into
> multicast
> UDP or what? (This is the best way). Using VLM mode you can set up a
> vlm.conf such as below (or you can do a straight vlc
> --program=3D1025,1035,1036 dvb: --dvb-adapter=3D0 --dvb-frequency=3D173=
3000  ..
> etc
>
> new   freeview broadcast enabled
> setup freeview input "dvb://"
> setup freeview option dvb-adapter=3D0
> setup freeview option dvb-frequency=3D1183000
> setup freeview option dvb-srate=3D22500000
> setup freeview option dvb-voltage=3D18
> setup freeview option dvb-fec=3D9
> setup freeview option dvb-tone=3D0
> setup freeview option programs=3D1025,1035,1036
> setup freeview option ts-es-id-pid
>
> setup freeview output
> #duplicate{dst=3Dstandard{access=3Dudp,mux=3Dts,url=3D239.255.100.98:12=
34,sap,group=3D
> "Freeview",name=3D"MaoriTV"},select=3D"program=3D1025",dst=3Dstandard{a=
ccess=3Dudp,mux
> =3Dts,url=3D239.255.100.99:1234,sap,group=3D"Freeview",name=3D"TV1"},se=
lect=3D"program
> =3D1035",dst=3Dstandard{access=3Dudp,mux=3Dts,url=3D239.255.100.100:123=
4,sap,group=3D"Fr
> eeview",name=3D"TV2"},select=3D"program=3D1036"}
>
> etc... (I think I got the above right for 3 channels..
> this will send all as Multicast UDP packets and advertise via SAP/SDP
> ....and then you can view on another vlc or whatever you want to use.
>

Also how are you tuning into these from MythTV.

Steve
--------------------------------------------
Steven Ellis - Technical Director
OpenMedia Limited - The Home of myPVR
email   - steven@openmedia.co.nz
sales   - sales@openmedia.co.nz
support - support@openmedia.co.nz
website - http://www.openmedia.co.nz