[mythtvnz] Getting my skysat working

[Corrin Lakeland]

Hi all,

I'm having some trouble getting my SkySat working.  I followed the  
directions on waikato's LUG and have managed to get a signal in dvbtune:

	dvbtune -f 1733000 -s 22500 -p h -m  -tone 0

scan -c -U also worked.

Where I ran into problems is in dvbstream, Unfortunately, that  
doesn't work, it returns:

corrin at mythone:~$ dvbstream -f 1173 -s 22500 -p h -o 512 650 | mplayer -
dvbstream v0.6 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Tuning to 1173 Hz
Using DVB card "ST STV0299 DVB-S", freq=1173
tuning DVB-S to Freq: 1173000, Pol:H Srate=22500000, 22kHz tone=off,  
LNB: 0
Setting only tone ON and voltage 18V
DISEQC SETTING SUCCEDED
Getting frontend status
MPlayer 2:1.0~rc1-0ubuntu13 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm)64 X2 Dual Core Processor  4200+ (Family: 15,  
Model: 43, Stepping: 1)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick

Playing -.
Reading from stdin...
Not able to lock to the signal on the given frequency
dvbstream will stop after -1 seconds (71582788 minutes)
Output to stdout
Streaming 2 streams
--
I'm wondering if the problem is tone=off, but otherwise I'm stuck.

Does anybody have any ideas?

Thanks,
Corrin