[mythtvnz] Diseq switch via Technisat card

[Steven Ellis]

Noel & Di wrote:
>
>
> Steven Ellis wrote:
>
>> On Mon, June 11, 2007 5:19 pm, Noel & Di wrote:
>>  
>>
>>> How do you set up a diseq switch in R5F1?  - is there a downloadable
>>> plugin or somesuch?
>>>   
>>
>> Should just work under the Diseq option when setting up the card.
>>
>> Have a look at Step 5 at
>> http://openmedia.co.nz/openmedia/content/view/88/59/ and you need to
>> select a Switch rather than an LNB.
>>
>> What type of Diseq have you got?
>>
>> Steve
>>
>> --------------------------------------------
>> Steven Ellis - Technical Director
>> OpenMedia Limited - The Home of myPVR
>> email   - steven@openmedia.co.nz
>> sales   - sales@openmedia.co.nz
>> support - support@openmedia.co.nz
>> website - http://www.openmedia.co.nz
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz@lists.linuxnut.co.nz
>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>> Thanks Steve
>>  
>>
> I am using a Veccom VDS-41 which is a 4-way diseq switch to control 4
> LNBs.  I am migrating my existing small-dish (1.2m) setup to the
> mythbox.  I have no probs setting up a single LNB, but can't see where
> to select the switch option under Diseq - there is only LNB listed.
> Noel
>
You will need to delete the existing LNB (press d) and then configure
the diseq

-- 
Steven Ellis - Technical Director
OpenMedia Limited
email   - steven@openmedia.co.nz
sales   - sales@openmedia.co.nz
support - support@openmedia.co.nz
website - http://www.openmedia.co.nz