[mythtvnz] DVB-S stopped working

[Steven Ellis]

Steve Hodge wrote:
> On 2/10/07, *alan.walls* <alan.walls@paradise.net.nz
> <mailto:alan.walls@paradise.net.nz>> wrote:
>
>     I tried the sky signal and that locked on
>
>      
>
>     [mythtv@server dvbtune-0.5]$ ./dvbtune -c 1 -f 1171000 -s 22500 -p
>     v -m
>
>
> What's your LNBs offset? Mine's a standard Sky one with 11300MHz so
> Sky's 12671MHz multiplex becomes 1371MHz. If the above command worked
> for you then that would make your LNB offset 11500MHz in which case
> the frequency you used for the TVNZ multiplex is wrong.
>
> Cheers,
> Steve
Ok my LNB offset is slightly different as I have a Universal LNB with an
LO of 10600. Anyhow my command is

dvbtune -t 1 -f 1883000 -s 22500 -D 0 -p h -m
Using DVB card "ST STV0299 DVB-S"
tuning DVB-S to L-Band:8, Pol:H Srate=22500000, 22kHz=off
ERROR setting tone
: Invalid argument
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Bit error rate: 94
Signal strength: 55306
SNR: 53112
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
A/V/TT Filters set
Signal=55648, Verror=0, SNR=53124dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=55042, Verror=0, SNR=52959dB, BlockErrors=0, (S|L|C|V|SY|)

So can you get Sky's signals but not TVNZ?

Steve


-- 
Steven Ellis - Technical Director
OpenMedia Limited
email   - steven@openmedia.co.nz
sales   - sales@openmedia.co.nz
support - support@openmedia.co.nz
website - http://www.openmedia.co.nz