[mythtvnz] Optus D1 HPol - TV3/C4
Steve Hodge
mythtvnz@lists.linuxnut.co.nz
Fri, 2 Feb 2007 14:15:47 +1300
------=_Part_13844_30921637.1170378947982
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On 2/2/07, Hadley Rich <mythtvnz@nice.net.nz> wrote:
>
> On Fri, 02 Feb 2007 13:40:07 Steve Hodge wrote:
> >
> > Ok, TVNZ's channels are all up. TV3's channels are all showing a test
> > pattern.
>
> How did you test? I can't seem to get dvbstream to play nicely for me.
>
> I can tune and scan with;
>
> dvbtune -f 1706000 -p H -tone 0 -s 22500 && scan -c
>
> for which I get results, but if I try and stream with;
>
> dvbstream -f 1706 -s 22500 -p h -o 512 650 | mplayer -
>
> or any frequencies/polarities/pids I get;
>
> 'Not able to lock to the signal on the given frequency'
>
> and nothing.
>
> Any ideas why dvbstream doesn't like me? I was thinking it may be the tone
> thing again as it does report;
>
> Using DVB card "ST STV0299 DVB-S", freq=1706
> tuning DVB-S to Freq: 1706000, Pol:H Srate=22500000, 22kHz tone=off, LNB:
> 0
> Setting only tone ON and voltage 18V
> DISEQC SETTING SUCCEDED
>
> (note the second to last line) but reading through the source I can't seem
> to
> see an option to set the tone :(
>
I've just got the old Sky LNB (11.3 GHz offset), so I initially tested with:
dvbtune -f 1156000 -s 22500 -p h -m
dvbtune -f 1183000 -s 22500 -p h -m
and dvbscan.
Then I just did a scan in mythtv-setup which worked fine.
Cheers,
Steve
------=_Part_13844_30921637.1170378947982
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On 2/2/07, <b class="gmail_sendername">Hadley Rich</b> <<a href="mailto:mythtvnz@nice.net.nz">mythtvnz@nice.net.nz</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On Fri, 02 Feb 2007 13:40:07 Steve Hodge wrote:<br>><br>> Ok, TVNZ's channels are all up. TV3's channels are all showing a test<br>> pattern.<br><br>How did you test? I can't seem to get dvbstream to play nicely for me.
<br><br>I can tune and scan with;<br><br>dvbtune -f 1706000 -p H -tone 0 -s 22500 && scan -c<br><br>for which I get results, but if I try and stream with;<br><br>dvbstream -f 1706 -s 22500 -p h -o 512 650 | mplayer -
<br><br>or any frequencies/polarities/pids I get;<br><br>'Not able to lock to the signal on the given frequency'<br><br>and nothing.<br><br>Any ideas why dvbstream doesn't like me? I was thinking it may be the tone
<br>thing again as it does report;<br><br>Using DVB card "ST STV0299 DVB-S", freq=1706<br>tuning DVB-S to Freq: 1706000, Pol:H Srate=22500000, 22kHz tone=off, LNB: 0<br>Setting only tone ON and voltage 18V<br>DISEQC SETTING SUCCEDED
<br><br>(note the second to last line) but reading through the source I can't seem to<br>see an option to set the tone :(<br></blockquote></div><br>I've just got the old Sky LNB (11.3 GHz offset), so I initially tested with:
<br>dvbtune -f 1156000 -s 22500 -p h -m<br>dvbtune -f 1183000 -s 22500 -p h -m<br>and dvbscan.<br><br>Then I just did a scan in mythtv-setup which worked fine.<br><br>Cheers,<br>Steve<br>
------=_Part_13844_30921637.1170378947982--