[mythtvnz] Satellite Channels

[Steven Ellis]

Noel & Di wrote:
> I was refering to D1 transponder.
>   
Sorry there were two different threads going on.

Yes Imparja and NITV are on D1 - 12643V, and as I mentioned we are
looking at ways to modify the MythTV code so that they will load

Steve
> Steven Ellis wrote:
>
>   
>> Noel & Di wrote:
>>  
>>
>>     
>>> I use 12643 V SR 6870
>>> Imparja uses vPID 1024, aPID 1025, dPID 1024
>>> NITV uses vPID 1040, aPID 1041, dPID 1040
>>> This is the NANZ beam - according to Lyngsat. 
>>> One of my (Non-Myth) receivers I couldn't receive anything when I 
>>> entered the settings in directly,
>>> So I discovered if I edited TV3 and C4 frequency SR & PID I could 
>>> receive NIT & Imparja.
>>> I had to re-scan  TV3 & C4 transponder to get them back afterwards.
>>> Noel
>>>
>>>  
>>>    
>>>
>>>       
>> There is only one NZ visible transponder on Optus C1 and all of the
>> content is encrypted and requires a smart card.
>>
>> Myself and Dean have both been looking at the Myth Code to find a way to
>> support NITV and Imparja. The problem is that they don't carry a PID to
>> map the A/V PIDs to the channel, hence the references elsewhere to
>> "hidden Pids".
>> at
>> I was considering proposing the following. If the SID/PID is "-1" then
>> don't do a DVB lookup, instead pick up the A/V PID values loaded into
>> atsc_major_chan and atsc_minor_chan entries in the channel table that
>> would otherwise be unused. It would need a reasonable size patch but at
>> the moment appears to be our only option.
>>
>> Steve
>>
>>  
>>
>>     
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>   


-- 
Steven Ellis - Technical Director
OpenMedia Limited
email   - steven at openmedia.co.nz
sales   - sales at openmedia.co.nz
support - support at openmedia.co.nz
website - http://www.openmedia.co.nz