[mythtvnz] Re: DiSeqC problems

[Rama Madhusudhan]

Hi Steve,
Thanks for the help.  That sorted the problem out.

Rama

Rama Madhusudhan wrote:
> Hi,
> I have got a 3-satellite setup (D1, C1, B3) that works via the command
> line (dvbstream), but I cannot get TV3, C4 working on live TV.
>
> I have my DiSeqC setup as a switch with 4 ports under mythtv-setup.
> When I scan on 12456 MHz for TV3 & C4, I have satellite lock and the
> channel list is updated. However, when I select TV3 to watch live, it
> does not gain lock. I am using skystar2. Scrolling to the other
> channels like TV1, Maori on D1, Russia Today on B3, and Aurora test
> channel on C1 I get lock with picture and sound. I have browsed the
> old listinga. There is mention of DiSeqC problems for multi-sat setup
> but not the kind I am getting yet. Anybody had this problem?
Have a look at the DVB multiplexes under channel tuning. Sometime Myth
gets the polarity wrong so check it is H and not V.

Steve

-- 
Steven Ellis - Technical Director
OpenMedia Limited
email - steven[at]openmedia.co.nz
sales - sales[at]openmedia.co.nz
support - support[at]openmedia.co.nz
website - http://www.openmedia.co.nz