[mythtvnz] Tuning FreeView - can't lock transponder and FRONTEND DEVICE busy?

[Steven Ellis]

Craig Whitmore wrote:
>> Getting frontend event
>> FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
>> FE_HAS_SYNC
>> Event:  Frequency: 11756000
>>        SymbolRate: 22500000
>>        FEC_inner:  3
>>
>> Bit error rate: 0
>> Signal strength: 62208
>> SNR: 62495
>> FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
>> FE_HAS_SYNC
>> frontend: 8FRONTEND DEVICE: : Device or resource busy
>>
>>
>
> This is normal with one of these cards. (the drivers are a little
> bugy) :-(  Don't fret.. just continue. the 8FRONTEND DEVICE: : Device
> or resource busy is just a bug in the drivers and actually means you
> have locked into a correct freq.
>
> Just tune in with myth as normal and everything will work. All the
> above step does is test if you get a signal.
Ooo. Thats a pain. Its so nice to get the feedback on a dvbtune with the
Skystar cards.

Steve

-- 
Steven Ellis - Technical Director
OpenMedia Limited
email   - steven@openmedia.co.nz
sales   - sales@openmedia.co.nz
support - support@openmedia.co.nz
website - http://www.openmedia.co.nz