[mythtvnz] DVB-S Radio

[Tim, Donna & Erin Gibson]

Alan

I've just finally this morning got B1, C1 and B3 all tuned in radio too...

Basically;

Stop mythbackend
goto mythtv-setup
doublecheck your capture cards
... now this is where I was going wrong ...
if you've more than one LNB on a diseqc switch make up a video source for each 
LNB, if only one call it OptusB1 cause later you'll need OptusD1 too.
... doing it that way works ...
in your input connections make each diseqc input point to their sattelites or 
just the one depending on your setup
in the next screen you'll have "scan for channels" make surevideo source and 
DVB options are correct and then goto the scan and try a full scan tunned on 
the following;
freq - 12519000 polarity - verticle symbol rate - 22500000 auto and auto
you should be sweet, any added channels will be visible by dafault.  make sure 
on each step you finish as you back out cause escaping will lose any changes 
now.  Exit setup and restart the backend.  Goto TV and goto channel 1101 for 
the national radio...

Probably a bit more than you wanted...

Regards
Tim

On Sunday 24 September 2006 11:42, AlanP wrote:
> According to Lyngsat, B1 also broadcasts several radio stations, beamed
> towards New Zealand. Stuff like National Radio, Concert FM, etc.
>
> How do I get Myth to pick these up from my Skystar2s?
>
> --
> Alan Podjursky                  ICQ 24423014
> "Yay, evil evil! Happy torture!" -- Gwyneth
> "When in doubt, use brute force." -- Ken Thompson
> http://www.fanfiction.net/~mercva
>
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz@lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

-- 
Regards
Tim, Donna & Erin Gibson
ICQ - 2207616