[mythtvnz] Pace RC18 remote lirc config anybody ?

[Wade Maxfield]

>Thanks for the info Toby. I did try the RC30 config but with no luck. My Sky
>box is a Pace DSR2000 and uses a different protocol for the remote. Anyway
>I'm building up an ir receiver  to learn the RC18 codes again. When Ive done
>it I'll post it if anybody is interested,
>Cheers
>Simon

I've got a DSR2000 and it uses the RC-30 config by Jon Waite.  It's 
in the list of standard remotes (I can't remember the address of 
those, so I've copied the config below)

The one things I did notice is that the IR transmitter has to be in 
exactly the right place for it to work (about 5-6 cm from the 
receiver).

I'm using one of the IR Blasters from irblaster.info, and it came 
with double sided tape attached, suggesting the transmitter should be 
attached to the receiver, but it won't work if I do that.  At the 
time I thought I had the wrong config, but with prompting from Dagan, 
I tried the RC-30 profile and it worked (dependent on placement)

So, I'd suggest giving the RC-30 codes another go.  8)

  - Wade


#
# this config file was automatically generated
# using lirc-0.7.0pre2 on Sat Feb  7 18:25:52 2004
#
# contributed by: Jon Waite <jon at jonwaite dot com>
#
# brand:                       Pace
# model no. of remote control: RC-30
# devices being controlled by this remote: Pace DSR620-GM Sky Digital
#                                          Decoder (New Zealand)
#

begin remote

   name  Pace_RC-30
   bits           16
   flags SPACE_ENC|CONST_LENGTH
   eps            30
   aeps          100

   header       9020  4544
   one           541  1696
   zero          541   579
   ptrail        506
   repeat       9014  2311
   pre_data_bits   16
   pre_data       0x213C
   gap          107807
   toggle_bit      0


       begin codes
           red                      0x0000000000007C83
           green                    0x000000000000B44B
           yellow                   0x000000000000BC43
           blue                     0x000000000000FC03
           1                        0x0000000000000CF3
           2                        0x000000000000946B
           3                        0x0000000000009C63
           4                        0x00000000000014EB
           5                        0x00000000000004FB
           6                        0x0000000000001CE3
           7                        0x0000000000004CB3
           8                        0x00000000000054AB
           9                        0x00000000000044BB
           0                        0x000000000000CC33
           tv                       0x0000000000008C73
           reserved                 0x000000000000F40B
           volup                    0x000000000000649B
           voldown                  0x000000000000E41B
           mute                     0x000000000000A45B
           chanup                   0x000000000000AC53
           chandown                 0x000000000000EC13
           guide                    0x000000000000748B
           back                     0x0000000000005CA3
           interactive              0x0000000000006C93
           up                       0x000000000000D42B
           down                     0x00000000000024DB
           left                     0x0000000000002CD3
           right                    0x000000000000DC23
           ok                       0x000000000000C43B
           plus                     0x0000000000003CC3
           question                 0x00000000000034CB
           power                    0x000000000000847B
       end codes

end remote