[mythtvnz] Anyone using a PVR150 in UBuntu?

[Graeme Woollett]

> Never been a fan of RTFM myself :-) But while I think its a stretch to 
> call it a "howto"  I documented some of the other gotchas I found 
> installing on ubuntu so I could remember them later, which might come 
> in handy for you too:
> http://www.simsemporium.com/Stuff/Mythtv+-+PVR-150+-+Ubuntu+-+New+Zealand+HOWTO.html 
>
>
>
I got this from dmesg, haven't tried it yet as I'm still at work.  
Should be OK (fingers crossed)


[4318529.824000] ivtv:  ==================== START INIT IVTV 
====================
[4318529.824000] ivtv:  version 0.4.2 (tagged release) loading
[4318529.824000] ivtv:  Linux version: 2.6.12-9-k7 K7 gcc-3.4
[4318529.824000] ivtv:  In case of problems please include the debug 
info between
[4318529.824000] ivtv:  the START INIT IVTV and END INIT IVTV lines, 
along with
[4318529.824000] ivtv:  any module options, when mailing the ivtv-users 
mailinglist.
[4318529.829000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[4318529.829000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, 
low) -> IRQ 17
[4318529.829000] ivtv0: Unreasonably low latency timer, setting to 64 
(was 32)
[4318529.852000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), 
addr=61]
[4318529.861000] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[4318530.029000] tveeprom: ivtv version
[4318530.029000] tveeprom: Hauppauge: model = 26559, rev = B260, serial# 
= 8745548
[4318530.029000] tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
[4318530.029000] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') 
PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
[4318530.029000] tveeprom: audio processor = CX25843 (type = 25)
[4318530.029000] tveeprom: decoder processor = CX25843 (type = 1e)
[4318530.029000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[4318530.076000] cx25840 2-0044: ivtv driver
[4318530.076000] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c 
driver #0)
[4318532.689000] cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 
bytes)
[4318532.736000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
[4318532.822000] wm8775 2-001b: ivtv driver
[4318532.822000] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[4318532.828000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
[4318532.850000] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c 
driver #0)
[4318532.850000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
[4318533.555000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[4318533.767000] ivtv0: Encoder revision: 0x02050032
[4318533.768000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 
buffers (4096KB total)
[4318533.861000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 
buffers (2048KB total)
[4318533.863000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 
buffers (2048KB total)
[4318540.230000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 
4608 buffers (2048KB total)
[4318540.232000] ivtv0: Create encoder radio stream
[4318540.232000] tuner 2-0061: type set to 38 (Philips PAL/SECAM multi 
(FM1216ME MK3))
[4318540.432000] ivtv0: Initialized WinTV PVR 150, card #0
[4318540.432000] ivtv:  ====================  END INIT IVTV  
====================


This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
MailScanner thanks transtec Computers for their support.
MailScanner Supplied by ITS-HelpDesk.
ext 4001 or email helpdesk@irl.cri.nz--