[mythtvnz] DVB issues

[Tim, Donna & Erin Gibson]

mmmm

When I look in channel ther are only listings for source 1 which is my 150MCE 
card nothing from the DVB card...

Tim

On Wednesday 09 August 2006 19:10, Steve Hodge wrote:
> On 8/9/06, Tim, Donna & Erin Gibson <tim_donna@slingshot.co.nz> wrote:
> > Steve
> >
> > That's the problem I've been having, I can scan 12483 and myth cannot
> > change to those channels when watching TV, error rate really high and
> > signal quality low, if I change cahhenl to 12671 (sky transponder) all's
> > OK.  Myth will not detect TVNZ Wide even though it's there...
> >
> > What are your settings out of the table in mysql, if I might be so
> > rude...
>
> No worries:
>
> In channel:
> callsign,mplexid,serviceid
> One,3,1035
> 2,3,1036
> MaoriTV,3,1025
> Bloomberg,3,1901
> DW-TV,3,1902
> CCTV9,3,1903
> TVNZ Wide,3,1904
>
> In dtv_multiplex:
> mplexid,frequency
> 3,12483000
> 12,12456000
>
> After I did a scan using mythtv-setup all of the channels above where
> inserted into the channel table except "TVNZ Wide". But the mplexid
> for all of them was set to 12. I had to manually change it to 3 (I
> don't know if you'll have the same mplexids - you'll have to check
> your db). "TVNZ Wide" I added manually.
>
> Cheers,
> Steve
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz@lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

-- 
Regards
Tim, Donna & Erin Gibson
ICQ - 2207616