[mythtvnz] tuning problems

[Steve Hodge]

> On Behalf Of criggie@criggie.dyndns.org
> > Thanks all - but the tuner card works fine.  My poorly explained proble=
m was
> > "how to I tell Mythtvbackend that TV3 is on frequency 123.4 MHz"
> >
> > The configuration for mythtv-setup is what I'm talking about.  I can tu=
ne
> > the card to a given frequency then cat /dev/video > file to produce a m=
peg
> > of that channel.

On 12/10/05, Duncan Kennington <zilla@paradise.net.nz> wrote:
> I never figured out how to get Myth to tune it.  I use an external script
> which basically contains the following line:

Don't you just put those values into "frequency id" under the channel
setup (in mythsetup)? That's how I've got mine setup, though I don't
have a Hauppauge just a dumb tuner card.

Steve