[chbot] TTL to Line driver

[Martin Towers]

Hi Wallace,
You might try looking for TTL to RS485 converters. 
This is a bad example - it's expensive and in India, but it shows they
exist.
https://robu.in/product/max485-ttl-rs485/

Martin


On Fri, 2020-09-11 at 16:12 +1200, Marshland Engineering wrote:
> My encoder has become intermittent on my CNC mill. I have found that
> my Liner
>  scale from Aliexpress has the correct resolution to work with the
> controls.
>  The problem I have is the linear scale is TTL output and the
> connection I
>  require is differential equivalent to a SN75183.
> 
> https://www.ti.com/lit/ds/symlink/sn75183.pdf
> 
> Anyone know of an off the shelf TTL to differential unit. My searches
> don't
>  yield much other than discrete components.  Maybe there is another
>  workaround? 
> 
> Thanks Wallace.
> 
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.