[chbot] Does anyone have experience of UV setting glue?

Charles Manning cdhmanning at gmail.com
Sun Jul 5 08:51:00 BST 2020

It will depend on what you are using it for and what you expect.

The stuff can go off quite easily, so treat /store it properly.

I used some for fly tying but I think it was a bit stale (off AliExpress).
It worked, but not nearly as well as youtubers flytiers are achieving.
I went back to epoxy.

On Sun, Jul 5, 2020 at 6:11 PM Mark Atherton <markaren1 at xtra.co.nz> wrote:

> I bought some of the Jaycar stuff, but so far have only used it to tack
> wires to PCBs which it does admirably.
> -Mark
> On 5/07/2020 5:09 PM, Robin Gilks wrote:
> > Greetings all
> >
> > Having seen lots of ad popups recently I wondered if anyone had tried it,
> > does it work satisfactorily, does it last and is it worth the money?
> >
> > Just a thought...
> >
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20200705/107b0ec7/attachment.html>

More information about the Chchrobotics mailing list