[chbot] Timing belt & pulley

Richard Jones richard.jones.1952 at gmail.com
Tue Aug 20 22:08:11 BST 2013


I would try Molten Media for used belts and pulleys. New belts and pulleys
might be more difficult.
http://www.molten.org.nz/

Richard


On Wed, Aug 21, 2013 at 8:52 AM, Young Chang <young.chang at skope.co.nz>wrote:

> Hello,****
>
> ** **
>
> My name is Younghun Chang, a mechanical engineer in Christchurch.****
>
> I am building an X scanner (one dimension scanner) to measure airflow. The
> span is around 1000mm.****
>
> The scanner holds 200g flow meter probe and its speed should be very slow.
> ****
>
> The movement is reciprocal and open belt can be all right.****
>
> Please let me know where I can have the belt and pulley in Christchurch.**
> **
>
> ** **
>
> Kind regards,****
>
> ** **
>
> Young****
>
>
> ------------------------------
>
> *This email and any accompanying attachments may contain information that is confidential and copyright reserved which may also be subject to legal privilege. If you are not the intended recipient, do not use, disseminate, distribute or copy this message or its attachments. If you have received this message in error, please notify the sender immediately and delete this message. Thank you.
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month at Tait Radio Communications, 175 Roydvale
> Ave, 6.30pm
>
> When replying, please edit your Subject line to reflect new content.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20130821/226a13d1/attachment.html>


More information about the Chchrobotics mailing list