<div dir="ltr">Hi All,<div><br></div><div style>Have run into a strange problem yesterday. I've had this card for a long time but have not recently used it (Was out of the system). Back then (6mths ago) it was working fine but had signal dropouts due to a bad antenna.</div>
<div style><br></div><div style>Fixed up the antenna a couple of weeks ago and having rocksolid signal on other cards (HVR4400) so decided to bring out the HVR2200 again.</div><div style><br></div><div style>Plugged it in, and was unable to get the tuning going at all. Strange as it worked previously in the exact same system/install before. Just had the regular online updates (opensuse 12.1).</div>
<div style><br></div><div style>I've checked the logs, and initially it looked like the dvb-fe-tda10048-1.0.fw did not get loaded. Strange but easily fixed.</div><div style><br></div><div style>Now all looks good, the logs look good, but just get no signal. I've tried the card in a different system using windows, same antenna+cables and works fine.</div>
<div style><br></div><div style>I'm at a loss atm. especially as the system used to work fine with this card. I've posted the logs below.. maybe someone has seen a similar problem? I've searched the net/mythlist but no luck..</div>
<div style><br></div><div style>I have double checked/downloaded the firmware files and they were all up to date and the same. I'm only intrested in DVB-T so have not bothered getting the analog fw to load etc. DVB should work fine without those afaik.</div>
<div style><br></div><div style>I tried tuning with "scan" and using MythTV.<br></div><div style><br></div><div style>- For the purpose of "Fresh" start, and easy to identify log entries first I removed the modules. (eventhough they all loaded fine)</div>
<div style><div>rmmod saa7164</div><div>rmmod tda18271</div><div><br></div><div style>- reload modules</div><div>modprobe tda18271</div><div>modprobe saa7164</div><div><br></div><div style>-investigate logs</div><div>tail/var/log/messages -n40:</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.504047] saa7164 driver loaded</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.504160] saa7164 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.507521] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge WinTV-HVR2200 [card=9,autodetected]</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.507528] saa7164[0]/0: found at 0000:06:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xdc400000</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.507537] saa7164 0000:06:00.0: setting latency timer to 64</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550901] tveeprom 4-0000: Hauppauge model 89619, rev D3F2, serial# 7844437</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550906] tveeprom 4-0000: MAC address is 00:0d:fe:77:b2:55</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550909] tveeprom 4-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550914] tveeprom 4-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550918] tveeprom 4-0000: audio processor is SAA7164 (idx 43)</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550921] tveeprom 4-0000: decoder processor is SAA7164 (idx 40)</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550923] tveeprom 4-0000: has radio</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.550926] saa7164[0]: Hauppauge eeprom: model=89619</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.599229] tda18271 5-0060: creating new instance</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.603489] TDA18271HD/C2 detected @ 5-0060</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.803631] DVB: registering new adapter (saa7164)</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.803637] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...</div>
<div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.835536] tda18271 6-0060: creating new instance</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1066.839655] TDA18271HD/C2 detected @ 6-0060</div><div>Mar 2 14:02:14 dvinepvr kernel: [ 1067.040540] tda18271: performing RF tracking filter calibration</div>
<div>Mar 2 14:02:16 dvinepvr kernel: [ 1069.229432] tda18271: RF tracking filter calibration complete</div><div>Mar 2 14:02:16 dvinepvr kernel: [ 1069.230454] DVB: registering new adapter (saa7164)</div><div>Mar 2 14:02:16 dvinepvr kernel: [ 1069.230461] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)...</div>
<div>Mar 2 14:02:16 dvinepvr kernel: [ 1069.231506] saa7164[0]: registered device video2 [mpeg]</div><div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.461413] saa7164[0]: registered device video3 [mpeg]</div><div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.671621] saa7164[0]: registered device vbi2 [vbi]</div>
<div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.671692] saa7164[0]: registered device vbi3 [vbi]</div><div><br></div><div style>-try scanning</div><div>scan -a 1 -f 0 /usr/share/dvb/dvb-t/nz-Waiatarua</div><div>scanning /usr/share/dvb/dvb-t/nz-Waiatarua</div>
<div>using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'</div><div>initial transponder 538000000 0 3 9 3 1 1 0</div><div>initial transponder 570000000 0 3 9 3 1 1 0</div><div>initial transponder 666000000 0 3 9 3 1 1 0</div>
<div>>>> tune to: 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE</div><div>WARNING: >>> tuning failed!!!</div><div>>>> tune to: 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)</div>
<div>WARNING: >>> tuning failed!!!</div><div>>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE</div><div>^CERROR: interrupted by SIGINT, dumping partial result...</div>
<div>dumping lists (0 services)</div><div>Done.</div><div><br></div><div style>-check logsg after scanning.. firmware loaded ok..</div><div>tail /var/log/messages</div><div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.461413] saa7164[0]: registered device video3 [mpeg]</div>
<div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.671621] saa7164[0]: registered device vbi2 [vbi]</div><div>Mar 2 14:02:17 dvinepvr kernel: [ 1069.671692] saa7164[0]: registered device vbi3 [vbi]</div><div>Mar 2 14:07:12 dvinepvr kernel: [ 1365.376321] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...</div>
<div>Mar 2 14:07:12 dvinepvr kernel: [ 1365.378654] tda10048_firmware_upload: firmware read 24878 bytes.</div><div>Mar 2 14:07:12 dvinepvr kernel: [ 1365.378658] tda10048_firmware_upload: firmware uploading</div><div>Mar 2 14:07:15 dvinepvr kernel: [ 1368.329360] tda10048_firmware_upload: firmware uploaded</div>
<div><br></div><div><br></div><div><br></div></div></div>