<div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
If those signal level % values were from the TD-500, I would say they<br>
were way too low.  But as far as I can tell, the numbers from each<br>
card are only comparable to the same exact model of card.  For the<br>
TD-500, if I am remembering correctly, you need > 65% signal level<br>
before it will record reliably.<br>
<br>
When you are getting lock on the HVR-4000 and TD-500, is that at the<br>
same time, or are you moving the cable between them?  If so, then<br>
adding the necessary splitter and its 6? db drop in the signal levels<br>
is going to cause problems.<br>
<br><br></blockquote><div><br></div><div>The signal levens listed are all on the HVR4000. I can't get the readings on the TD500, it does not seem to support reading out those values?</div><div><br></div><div>The lock on HVR40000 and TD500 is not on the exact same time. but a minute apart max. I move the cable between them. In any of the tests I did I have never used a splitter or anything.  </div>

<div><br></div><div>Also, no matter what I do with the antenna, the signal level is always 21%, so I think it might not be a value that can be read out on the HVR4000.</div></div>