<div class="gmail_quote">On 13 January 2011 23:18, Brett <span dir="ltr"><<a href="mailto:mythicalbeast@slingshot.co.nz">mythicalbeast@slingshot.co.nz</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div class="im"><br>
> ><br>
> It depends on the type of card. If you have the old version of this<br>
> card (only one aerial jack on the back of the card) it works much<br>
> better with the old firmware (1.10) if you have two aerial jacks then<br>
> the 1.20 firmware should work fine.<br>
><br>
</div>I've got the old card.<br>
Never had a problem with 1.20 firmware but I never use the internal IR<br>
receiver functionality.</blockquote><div> </div></div>I now have the card in a separate box (for testing purposes, I don't want to break my working server).<div><br></div><div>My testing now leaves me pessimistic that I will get it working.</div>
<div><br></div><div>In summary, the drivers appear to load and the card registers and is recognized by the software I am using, including mythtv. At first I thought it was a signal issue and tried different aerials, but on closer examination, I noticed that actually mythtv (and tzap) were reporting 0% signal on the same aerial that another card was reporting 50% signal. So I now think there is a card fault with the aerial connector...</div>
<div><br></div><div>Oh well, unless someone tells me that my conclusion is wrong, I am not going to waste a lot more time on this card.</div><div><br></div><div>Thanks to all for your suggestions.</div><div><br></div><div>
Brendan</div>