<html><body bgcolor="#FFFFFF"><div>I've had a bad run on those cards. I finally have two that work now, but also two that didn't work, right out of the box. <br><br></div><div><br></div><div><br>On 17/10/2010, at 11:15 AM, "Julius Spencer" <<a href="mailto:julius@msa.co.nz">julius@msa.co.nz</a>> wrote:<br><br></div><div></div><blockquote type="cite"><div>
<!-- Converted from text/plain format -->
<p><font size="2">Hi,<br>
<br>
I have the same problem - have had for about a year now. While scanning II have a signal of 98% and the signal/noise % bounces around and I don't get a lock.<br>
<br>
I have even bought a second card in case the old one was broken - so now I have two Nova S Plus cards.<br>
<br>
Did you manage to figure it out?<br>
(I have a DSE Freeview device which can play all channels so I know it's not the dish or signal)<br>
<br>
I am using:<br>
<br>
Frequency : 12456000 or 12483000<br>
Polarity : horizontal<br>
Symbol Rate : 22500000<br>
FEC : Auto<br>
Inversion : Auto<br>
<br>
Cheers,<br>
Julius.<br>
<br>
<br>
On 16/08/2010, at 1:21 PM, Bob . wrote:<br>
<br>
> On Mon, Aug 16, 2010 at 8:06 AM, Nick Rout <<a href="mailto:nick.rout@gmail.com">nick.rout@gmail.com</a>> wrote:<br>
>> On Sun, Aug 15, 2010 at 11:24 PM, Bob . <<a href="mailto:maillists.mythtv@gmail.com">maillists.mythtv@gmail.com</a>> wrote:<br>
>>> Any idea why this might be happening?<br>
>><br>
>> Are you sure you have it set to horizontal polarity?<br>
><br>
> Yep. And I've tried with vertical polarity, and explict 3/4 FEC, and<br>
> inversion on and off. Still no luck.<br>
><br>
><br>
> One thing I noticed was that the transports that myth automatically<br>
> created for the 12456 scans were QPSK whereas the one for the 12483<br>
> scan was AUTO. I guess it can only figure that out once it gets a<br>
> lock... I tried to manually create the transport but there is no<br>
> option for choosing the modulation.<br>
><br>
><br>
> I also scrapped all the settings right back to the capture card and<br>
> recreated everything hoping that would clear out some gremlins...<br>
> didn't seem to.<br>
><br>
><br>
> Any other advice?<br>
><br>
> Ta.<br>
><br>
> _______________________________________________<br>
> mythtvnz mailing list<br>
> <a href="mailto:mythtvnz@lists.linuxnut.co.nz"><a href="mailto:mythtvnz@lists.linuxnut.co.nz">mythtvnz@lists.linuxnut.co.nz</a></a><br>
> <a href="http://lists.ourshack.com/mailman/listinfo/mythtvnz"><a href="http://lists.ourshack.com/mailman/listinfo/mythtvnz">http://lists.ourshack.com/mailman/listinfo/mythtvnz</a></a><br>
> Archives <a href="http://www.gossamer-threads.com/lists/mythtv/mythtvnz/"><a href="http://www.gossamer-threads.com/lists/mythtv/mythtvnz/">http://www.gossamer-threads.com/lists/mythtv/mythtvnz/</a></a><br>
<br>
<br>
_______________________________________________<br>
mythtvnz mailing list<br>
<a href="mailto:mythtvnz@lists.linuxnut.co.nz"><a href="mailto:mythtvnz@lists.linuxnut.co.nz">mythtvnz@lists.linuxnut.co.nz</a></a><br>
<a href="http://lists.ourshack.com/mailman/listinfo/mythtvnz"><a href="http://lists.ourshack.com/mailman/listinfo/mythtvnz">http://lists.ourshack.com/mailman/listinfo/mythtvnz</a></a><br>
Archives <a href="http://www.gossamer-threads.com/lists/mythtv/mythtvnz/"><a href="http://www.gossamer-threads.com/lists/mythtv/mythtvnz/">http://www.gossamer-threads.com/lists/mythtv/mythtvnz/</a></a><br>
</font>
</p>
</div></blockquote></body></html>