<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><br><div><div>On 9/05/2010, at 10:09 AM, Matt Poff wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><div><br>On 9/05/2010, at 8:53 AM, James Gray wrote:<br><br><blockquote type="cite"><blockquote type="cite"><blockquote type="cite">Do you have a Sky box as well?<br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite">No, just a single LNB, fed to two DVB-S cards via a splitter. This is<br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite">typical of what I'm seeing in the OSD when switching to an SBS <br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite">channel:<br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite">Signal 84% | S/N 4.5db | BE 2800 | (1__) | No Lock<br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite">Sometimes I get a partial lock also.<br></blockquote></blockquote><blockquote type="cite"><br></blockquote><blockquote type="cite">Have you tried taking the splitter and second card out of the <br></blockquote><blockquote type="cite">equation?<br></blockquote><br>Interesting. I disconnected the second card at the splitter junction <br>and tried again. Got a strong lock this time but plenty of drop-outs <br>and glitching. This didn't last though and the system errorred out <br>trying to connect to this and other pre-existing previously working NZ <br>channels (thought this might be a side-effect of not fully disabling <br>the disconnected card. Is it worth setting the option in Myth-Setup <br>that only grabs a DVB-S card when it needs it? There's obviously some <br>conflict there.<font class="Apple-style-span" color="#000000"><font class="Apple-style-span" color="#144FAE"><br></font></font></div></blockquote><br></div><div>Yep that did it. Disabling EIT polling and checking the option to only capture each card when required released the cards to tune to SBS. I think the EIT polling option was holding a continual lock on the Freeview EIT feed and so preventing a tune to SBS.</div><div><br></div><div><br></div><div><br></div></body></html>