<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Philip,<br>
<br>
Thanks for that. I tried changing it to
"/dev/input/by-path/pci-11-1--event-ir" but it didn't make any
difference. Still doesn't work. Can you post your whole hardware.conf?<br>
<br>
Rossco<br>
<br>
<a class="moz-txt-link-abbreviated" href="mailto:banksie@paradise.net.nz">banksie@paradise.net.nz</a> wrote:
<blockquote cite="mid:1233879674.498b827a4c50d@www.paradise.net.nz"
type="cite">
<pre wrap="">Quoting Ross and Jemima Knudsen <a class="moz-txt-link-rfc2396E" href="mailto:ross.jemima@gmail.com"><ross.jemima@gmail.com></a>:
</pre>
<blockquote type="cite">
<pre wrap="">Sorry that didn't paste correctly. It is (typed by hand this time):
lircd(userspace) ready
accepted new client on /dev/lircd
initializing '/dev/input/irremote'
unable to open '/dev/input/irremote'
caught signal
There are several of these entries.
</pre>
</blockquote>
<pre wrap=""><!---->
When I was configuring my Nova-T500 HD I couldn't use /dev/irremote. Instead
I have to use the input by path specifier so for my setup this is :-
REMOTE_DEVICE="/dev/input/by-path/pci-3-1--event-ir"
This will vary depending on what pci slot you have the card plugged into. So you
need to do a little rummaging in /dev/input/by-path to see where it is.
Philip
_______________________________________________
mythtvnz mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtvnz@lists.linuxnut.co.nz">mythtvnz@lists.linuxnut.co.nz</a>
<a class="moz-txt-link-freetext" href="http://lists.ourshack.com/mailman/listinfo/mythtvnz">http://lists.ourshack.com/mailman/listinfo/mythtvnz</a>
Archives <a class="moz-txt-link-freetext" href="http://www.gossamer-threads.com/lists/mythtv/mythtvnz/">http://www.gossamer-threads.com/lists/mythtv/mythtvnz/</a>
</pre>
</blockquote>
</body>
</html>