Apr  8 20:14:08 [kernel] system 00:01: iomem range 0xd0000-0xd3fff has been reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xf0000-0xf7fff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xfc000-0xfffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0x3fff0000-0x3fffffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xffff0000-0xffffffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0x0-0x9ffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0x100000-0x3ffeffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xfefff000-0xfeffffff could not be reserved
Apr  8 20:14:09 [kernel] system 00:01: iomem range 0xfff80000-0xfff80fff could not be reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xb78-0xb7b has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xf78-0xf7b has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xa78-0xa7b has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xe78-0xe7b has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xbbc-0xbbf has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0xfbc-0xfbf has been reserved
Apr  8 20:14:09 [kernel] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Apr  8 20:14:09 [kernel] PCI: Bridge: 0000:00:0b.0
Apr  8 20:14:09 [kernel]   IO window: a000-afff
Apr  8 20:14:09 [kernel]   MEM window: fa000000-fcffffff
Apr  8 20:14:09 [kernel]   PREFETCH window: d0000000-dfffffff
Apr  8 20:14:09 [kernel] PCI: Bridge: 0000:00:0e.0
Apr  8 20:14:09 [kernel]   IO window: 9000-9fff
Apr  8 20:14:09 [kernel]   MEM window: fdf00000-fdffffff
Apr  8 20:14:09 [kernel]   PREFETCH window: f4000000-f7ffffff
Apr  8 20:14:09 [kernel] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Apr  8 20:14:09 [kernel] NET: Registered protocol family 2
Apr  8 20:14:09 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr  8 20:14:09 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  8 20:14:09 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Apr  8 20:14:09 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
Apr  8 20:14:09 [kernel] TCP reno registered
Apr  8 20:14:09 [kernel] Machine check exception polling timer started.
Apr  8 20:14:09 [kernel] cpufreq: No nForce2 chipset.
Apr  8 20:14:09 [kernel] audit: initializing netlink socket (disabled)
Apr  8 20:14:09 [kernel] audit(1207642403.400:1): initialized
Apr  8 20:14:09 [kernel] highmem bounce pool size: 64 pages
Apr  8 20:14:09 [kernel] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Apr  8 20:14:09 [kernel] JFS: nTxBlock = 8073, nTxLock = 64589
Apr  8 20:14:09 [kernel] SGI XFS with no debug enabled
Apr  8 20:14:09 [kernel] io scheduler noop registered
Apr  8 20:14:09 [kernel] io scheduler anticipatory registered
Apr  8 20:14:09 [kernel] io scheduler deadline registered
Apr  8 20:14:09 [kernel] io scheduler cfq registered (default)
Apr  8 20:14:09 [kernel] Boot video device is 0000:01:00.0
Apr  8 20:14:09 [kernel] Real Time Clock Driver v1.12ac
Apr  8 20:14:09 [kernel] Non-volatile memory driver v1.2
Apr  8 20:14:09 [kernel] tridentfb: Trident framebuffer 0.7.8-NEWAPI initializing
Apr  8 20:14:09 [kernel] input: Power Button (FF) as /devices/virtual/input/input0
Apr  8 20:14:09 [kernel] ACPI: Power Button (FF) [PWRF]
Apr  8 20:14:09 [kernel] input: Power Button (CM) as /devices/virtual/input/input1
Apr  8 20:14:09 [kernel] ACPI: Power Button (CM) [PWRB]
Apr  8 20:14:09 [kernel] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Apr  8 20:14:09 [kernel] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  8 20:14:09 [kernel] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  8 20:14:09 [kernel] parport_pc 00:09: reported by Plug and Play ACPI
Apr  8 20:14:09 [kernel] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Apr  8 20:14:09 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Apr  8 20:14:09 [kernel] loop: module loaded
Apr  8 20:14:09 [kernel] Linux video capture interface: v2.00
Apr  8 20:14:09 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Apr  8 20:14:09 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr  8 20:14:09 [kernel] NFORCE3-250: IDE controller (0x10de:0x00e5 rev 0xa2) at  PCI slot 0000:00:08.0
Apr  8 20:14:09 [kernel] NFORCE3-250: not 100% native mode: will probe irqs later
Apr  8 20:14:09 [kernel] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
Apr  8 20:14:09 [kernel] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
Apr  8 20:14:09 [kernel]     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
Apr  8 20:14:09 [kernel]     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
Apr  8 20:14:09 [kernel] Probing IDE interface ide0...
Apr  8 20:14:09 [kernel] Switched to high resolution mode on CPU 0
Apr  8 20:14:09 [kernel] hdb: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
Apr  8 20:14:09 [kernel] hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
Apr  8 20:14:09 [kernel] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  8 20:14:09 [kernel] hda: UDMA/33 mode selected
Apr  8 20:14:09 [kernel] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  8 20:14:09 [kernel] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr  8 20:14:09 [kernel] Probing IDE interface ide1...
Apr  8 20:14:09 [kernel] hdd: WDC WD3000JB-00KFA0, ATA DISK drive
Apr  8 20:14:09 [kernel] hdc: WDC WD3000JB-00KFA0, ATA DISK drive
Apr  8 20:14:09 [kernel] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  8 20:14:09 [kernel] hdc: UDMA/100 mode selected
Apr  8 20:14:09 [kernel] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  8 20:14:09 [kernel] hdd: UDMA/100 mode selected
Apr  8 20:14:09 [kernel] ide1 at 0x170-0x177,0x376 on irq 15
Apr  8 20:14:09 [kernel] hdc: max request size: 512KiB
Apr  8 20:14:09 [kernel] hdc: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63
Apr  8 20:14:09 [kernel] hdc: cache flushes supported
Apr  8 20:14:09 [kernel]  hdc: hdc1 hdc2 hdc3
Apr  8 20:14:09 [kernel] hdd: max request size: 512KiB
Apr  8 20:14:09 [kernel] hdd: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63
Apr  8 20:14:09 [kernel] hdd: cache flushes supported
Apr  8 20:14:09 [kernel]  hdd: hdd1 hdd2
Apr  8 20:14:09 [kernel] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Apr  8 20:14:09 [kernel] Uniform CD-ROM driver Revision: 3.20
Apr  8 20:14:09 [kernel] hdb: ATAPI 40X DVD-ROM drive, 254kB Cache
Apr  8 20:14:09 [kernel] Driver 'sd' needs updating - please use bus_type methods
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
Apr  8 20:14:09 [kernel] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fdffe000-fdffe7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Apr  8 20:14:09 [kernel] video1394: Installed video1394 module
Apr  8 20:14:09 [kernel] ieee1394: raw1394: /dev/raw1394 device initialized
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:07.2[C] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
Apr  8 20:14:09 [kernel] ehci_hcd 0000:02:07.2: EHCI Host Controller
Apr  8 20:14:09 [kernel] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
Apr  8 20:14:09 [kernel] ehci_hcd 0000:02:07.2: irq 16, io mem 0xfdfff000
Apr  8 20:14:09 [kernel] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr  8 20:14:09 [kernel] usb usb1: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] hub 1-0:1.0: USB hub found
Apr  8 20:14:09 [kernel] hub 1-0:1.0: 4 ports detected
Apr  8 20:14:09 [kernel] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, high) -> IRQ 17
Apr  8 20:14:09 [kernel] PCI: Setting latency timer of device 0000:00:02.0 to 64
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.0: OHCI Host Controller
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.0: irq 17, io mem 0xfe02f000
Apr  8 20:14:09 [kernel] usb usb2: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] hub 2-0:1.0: USB hub found
Apr  8 20:14:09 [kernel] hub 2-0:1.0: 4 ports detected
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 18
Apr  8 20:14:09 [kernel] PCI: Setting latency timer of device 0000:00:02.1 to 64
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.1: OHCI Host Controller
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Apr  8 20:14:09 [kernel] ohci_hcd 0000:00:02.1: irq 18, io mem 0xfe02e000
Apr  8 20:14:09 [kernel] usb usb3: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] hub 3-0:1.0: USB hub found
Apr  8 20:14:09 [kernel] hub 3-0:1.0: 4 ports detected
Apr  8 20:14:09 [kernel] usb 1-1: new high speed USB device using ehci_hcd and address 2
Apr  8 20:14:09 [kernel] USB Universal Host Controller Interface driver v3.0
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.0: UHCI Host Controller
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.0: irq 19, io base 0x00009c00
Apr  8 20:14:09 [kernel] usb usb4: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] hub 4-0:1.0: USB hub found
Apr  8 20:14:09 [kernel] hub 4-0:1.0: 2 ports detected
Apr  8 20:14:09 [kernel] usb 1-1: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:07.1[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.1: UHCI Host Controller
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
Apr  8 20:14:09 [kernel] uhci_hcd 0000:02:07.1: irq 20, io base 0x00009800
Apr  8 20:14:09 [kernel] usb usb5: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] hub 5-0:1.0: USB hub found
Apr  8 20:14:09 [kernel] hub 5-0:1.0: 2 ports detected
Apr  8 20:14:09 [kernel] sl811: driver sl811-hcd, 19 May 2005
Apr  8 20:14:09 [kernel] usb 2-1: new full speed USB device using ohci_hcd and address 2
Apr  8 20:14:09 [kernel] usb 2-1: configuration #1 chosen from 1 choice
Apr  8 20:14:09 [kernel] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000790b85]
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver usblp
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver usb-storage
Apr  8 20:14:09 [kernel] USB Mass Storage support registered.
Apr  8 20:14:09 [kernel] PNP: No PS/2 controller found. Probing ports directly.
Apr  8 20:14:09 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  8 20:14:09 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  8 20:14:09 [kernel] mice: PS/2 mouse device common for all mice
Apr  8 20:14:09 [kernel] rtc_cmos: probe of 00:05 failed with error -16
Apr  8 20:14:09 [kernel] w83627hf: Found W83627THF chip at 0x290
Apr  8 20:14:09 [kernel] w83627hf w83627hf.656: Reading VID from GPIO5
Apr  8 20:14:09 [kernel] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver hiddev
Apr  8 20:14:09 [kernel] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
Apr  8 20:14:09 [kernel] input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1
Apr  8 20:14:09 [kernel] Fixing up Logitech keyboard report descriptor
Apr  8 20:14:09 [kernel] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input3
Apr  8 20:14:09 [kernel] input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver usbhid
Apr  8 20:14:09 [kernel] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Apr  8 20:14:09 [kernel] Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 21
Apr  8 20:14:09 [kernel] PCI: Setting latency timer of device 0000:00:06.0 to 64
Apr  8 20:14:09 [kernel] intel8x0_measure_ac97_clock: measured 54762 usecs
Apr  8 20:14:09 [kernel] intel8x0: clocking to 46938
Apr  8 20:14:09 [kernel] ALSA device list:
Apr  8 20:14:09 [kernel]   #0: NVidia CK8S with ALC850 at irq 21
Apr  8 20:14:09 [kernel] oprofile: using NMI interrupt.
Apr  8 20:14:09 [kernel] TCP cubic registered
Apr  8 20:14:09 [kernel] NET: Registered protocol family 1
Apr  8 20:14:09 [kernel] NET: Registered protocol family 17
Apr  8 20:14:09 [kernel] RPC: Registered udp transport module.
Apr  8 20:14:09 [kernel] RPC: Registered tcp transport module.
Apr  8 20:14:09 [kernel] ieee80211: 802.11 data/management/control stack, git-1.1.13
Apr  8 20:14:09 [kernel] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Apr  8 20:14:09 [kernel] ieee80211_crypt: registered algorithm 'NULL'
Apr  8 20:14:09 [kernel] ieee80211_crypt: registered algorithm 'WEP'
Apr  8 20:14:09 [kernel] ieee80211_crypt: registered algorithm 'CCMP'
Apr  8 20:14:09 [kernel] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
Apr  8 20:14:09 [kernel] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
Apr  8 20:14:09 [kernel] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
Apr  8 20:14:09 [kernel] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
Apr  8 20:14:09 [kernel] Using IPI Shortcut mode
Apr  8 20:14:09 [kernel] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Apr  8 20:14:09 [kernel] ReiserFS: hdc3: found reiserfs format "3.6" with standard journal
Apr  8 20:14:09 [kernel] ReiserFS: hdc3: using ordered data mode
Apr  8 20:14:09 [kernel] ReiserFS: hdc3: journal params: device hdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  8 20:14:09 [kernel] ReiserFS: hdc3: checking transaction log (hdc3)
Apr  8 20:14:09 [kernel] ReiserFS: hdc3: Using r5 hash to sort names
Apr  8 20:14:09 [kernel] VFS: Mounted root (reiserfs filesystem) readonly.
Apr  8 20:14:09 [kernel] Freeing unused kernel memory: 236k freed
Apr  8 20:14:09 [kernel] Marking TSC unstable due to: cpufreq changes.
Apr  8 20:14:09 [kernel] Time: acpi_pm clocksource has been installed.
Apr  8 20:14:09 [kernel] Clocksource tsc unstable (delta = -245726660 ns)
Apr  8 20:14:09 [kernel] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Apr  8 20:14:09 [kernel] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Apr  8 20:14:09 [kernel] ivtv:  Start initialization, version 1.1.0
Apr  8 20:14:09 [kernel] ivtv0: Initializing card #0
Apr  8 20:14:09 [kernel] ivtv0: Autodetected Hauppauge card (cx23416 based)
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
Apr  8 20:14:09 [kernel] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Apr  8 20:14:09 [kernel] tveeprom 2-0050: The eeprom says no radio is present, but the tuner type
Apr  8 20:14:09 [kernel] tveeprom 2-0050: indicates otherwise. I will assume that radio is present.
Apr  8 20:14:09 [kernel] tveeprom 2-0050: Hauppauge model 26139, rev G1A5, serial# 9533933
Apr  8 20:14:09 [kernel] tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
Apr  8 20:14:09 [kernel] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Apr  8 20:14:09 [kernel] tveeprom 2-0050: audio processor is CX25842 (idx 36)
Apr  8 20:14:09 [kernel] tveeprom 2-0050: decoder processor is CX25842 (idx 29)
Apr  8 20:14:09 [kernel] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
Apr  8 20:14:09 [kernel] ivtv0: Autodetected Hauppauge WinTV PVR-150
Apr  8 20:14:09 [kernel] ivtv0: Reopen i2c bus for IR-blaster support
Apr  8 20:14:09 [kernel] nvidia: module license 'NVIDIA' taints kernel.
Apr  8 20:14:09 [kernel] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
Apr  8 20:14:09 [kernel] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
Apr  8 20:14:09 [kernel] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
Apr  8 20:14:09 [kernel] tuner 2-0043: type set to tda9887
Apr  8 20:14:09 [kernel] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Apr  8 20:14:09 [kernel] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Apr  8 20:14:09 [kernel] cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
Apr  8 20:14:09 [kernel] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
Apr  8 20:14:09 [kernel] tuner-simple 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Apr  8 20:14:09 [kernel] tuner 2-0061: type set to Philips PAL/SECAM m
Apr  8 20:14:09 [kernel] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Apr  8 20:14:09 [kernel] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Apr  8 20:14:09 [kernel] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Apr  8 20:14:09 [kernel] ivtv0: Registered device video24 for encoder PCM (320 kB)
Apr  8 20:14:09 [kernel] ivtv0: Registered device radio0 for encoder radio
Apr  8 20:14:09 [kernel] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
Apr  8 20:14:09 [kernel] ivtv:  End initialization
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 22
Apr  8 20:14:09 [kernel] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
Apr  8 20:14:09 [kernel] dib0700: firmware started successfully.
Apr  8 20:14:09 [kernel] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
Apr  8 20:14:09 [kernel] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Apr  8 20:14:09 [kernel] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Apr  8 20:14:09 [kernel] DVB: registering frontend 0 (DiBcom 3000MC/P)...
Apr  8 20:14:09 [kernel] MT2060: successfully identified (IF1 = 1220)
Apr  8 20:14:09 [kernel] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Apr  8 20:14:09 [kernel] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Apr  8 20:14:09 [kernel] DVB: registering frontend 1 (DiBcom 3000MC/P)...
Apr  8 20:14:09 [kernel] MT2060: successfully identified (IF1 = 1220)
Apr  8 20:14:09 [kernel] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver dvb_usb_dib0700
Apr  8 20:14:09 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
Apr  8 20:14:09 [kernel] ndiswrapper version 1.52 loaded (smp=no, preempt=yes)
Apr  8 20:14:09 [kernel] ndiswrapper: driver rt61 (Linksys, A Division of Cisco Systems, Inc.,10/18/2005, 1.00.03.0000) loaded
Apr  8 20:14:09 [kernel] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
Apr  8 20:14:09 [kernel] ndiswrapper: using IRQ 16
Apr  8 20:14:09 [kernel] wlan0: ethernet device ##:##:##:##:##:## (EDITED) using serialized NDIS driver: rt61, version: 0x0, NDIS version: 0x500, vendor: 'Linksys Wireless-G PCI Adapter', 1814:0301.5.conf
Apr  8 20:14:09 [kernel] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Apr  8 20:14:09 [kernel] usbcore: registered new interface driver ndiswrapper
Apr  8 20:14:09 [kernel] ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
Apr  8 20:14:09 [kernel] udev: renamed network interface wlan0 to wlan1
Apr  8 20:14:09 [kernel] lirc_dev: IR Remote Control driver registered, major 61 
Apr  8 20:14:09 [kernel] bttv: driver version 0.9.17 loaded
Apr  8 20:14:09 [kernel] bttv: using 8 buffers with 2080k (520 pages) each for capture
Apr  8 20:14:09 [kernel] lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150)
Apr  8 20:14:09 [kernel] lirc_dev: lirc_register_plugin: sample_rate: 10
Apr  8 20:14:09 [kernel] ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
Apr  8 20:14:09 [kernel] ReiserFS: hdc1: using ordered data mode
Apr  8 20:14:09 [kernel] ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  8 20:14:09 [kernel] ReiserFS: hdc1: checking transaction log (hdc1)
Apr  8 20:14:09 [kernel] ReiserFS: hdc1: Using r5 hash to sort names
Apr  8 20:14:09 [kernel] ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
Apr  8 20:14:09 [kernel] ReiserFS: hdd1: using ordered data mode
Apr  8 20:14:09 [kernel] ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  8 20:14:09 [kernel] ReiserFS: hdd1: checking transaction log (hdd1)
Apr  8 20:14:09 [kernel] ReiserFS: hdd1: Using r5 hash to sort names
Apr  8 20:14:09 [kernel] XFS mounting filesystem hdd2
Apr  8 20:14:09 [kernel] Ending clean XFS mount for filesystem: hdd2
Apr  8 20:14:09 [kernel] Adding 2008116k swap on /dev/hdc2.  Priority:-1 extents:1 across:2008116k
Apr  8 20:14:09 [kernel] hda: UDMA/33 mode selected
Apr  8 20:14:09 [kernel] hdb: UDMA/33 mode selected
Apr  8 20:14:09 [kernel] hdc: UDMA/100 mode selected
Apr  8 20:14:09 [kernel] hdd: UDMA/100 mode selected
Apr  8 20:16:46 [kernel] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Apr  8 20:16:47 [kernel] ivtv0: Encoder revision: 0x02060039
Apr  8 20:16:50 [kernel] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Apr  8 20:16:50 [kernel] cx25840 2-0044: 1x2 is not a valid size!